Wiggilez Posted June 29, 2013 Share Posted June 29, 2013 So I recently bought an 86 Comanche, which me and my friend quickly dubbed "Fat Betty" with the slogan of "She's a b*@$£" She drives alright, needs a basic tune up, along with a few other thing to make it road legal in my province. The brakes on it were all in great shape considering how the rest of it looks, the drums were a pain to get off though, had to coax em off with a hammer and pry bar. as well as unhooking the Ebrake. I need to get a real jack... ratcheting wrenches a awesome. there in good shape yay, less money I need to spend on it :) The front was less of a hassle other then three lugs which required this set up, I pretty much step all of my 150 pounds while pulling up on it, it got the job done as well as give my tire iron a good bending. and lastly at least for today a pic of the interior and the entrance to one of many spider nest. she needs some work, but its looking like a fun project :) Next I intend to change all fluids next. and then trying to find and replace any leaky seals october 7 2013 i've patched one of the hole, as well a got some new BGF at's for it i'll hopfully have some pics up before the end of the week Link to comment Share on other sites More sharing options...
Wiggilez Posted February 11, 2014 Author Share Posted February 11, 2014 I've slowly patching the holes in my truck, also recently found a donor for my truck, it a 1990 Cherokee for 350$ :) with 4l I6 what I think is a NP242 transfer case (the one with both full and part time 4x4) i think it has an aw4 auto but I don't want, so until it goes I don't care what it is, i"ll try to get some pics here later this week. Link to comment Share on other sites More sharing options...
Wiggilez Posted May 9, 2014 Author Share Posted May 9, 2014 I pick up a D44 a while ago for My MJ. Today I Final got around to clean/striping so I can weld the perches in the proper spot for the truck. The 10mm was to big, and i don't own a set of imperial wrenches. so an angle grinder and a 9mm did the trick. time for a break, Ahhh the life pretty much done now that Cherokee seat is where I sit and admire my work :) (that's the donor XJ, no room for both the MJ and XJ, so the MJ sits at a rental property. Link to comment Share on other sites More sharing options...
moos Posted May 9, 2014 Share Posted May 9, 2014 Half your pics work. Link to comment Share on other sites More sharing options...
Wiggilez Posted March 4, 2015 Author Share Posted March 4, 2015 It's been a long time since I updated this, long time, I haven't done much to the truck, other than completely striping the donor XJ for this project, I did however just pick up a new part for it :) A 1990 AX-15 :) I paid 260$ for it, not bad considering it was pulled out of the vehicle and put in my truck without me having to turn a wrench. :) Link to comment Share on other sites More sharing options...
dustyinthedirt Posted March 4, 2015 Share Posted March 4, 2015 its gonna be awesome man. keep it up Link to comment Share on other sites More sharing options...
Wiggilez Posted March 4, 2015 Author Share Posted March 4, 2015 Thanks :) I wish I could work on it, but its cold out :( and its sitting at my parents rental house till summer :/ Link to comment Share on other sites More sharing options...
ComancheKid45 Posted March 4, 2015 Share Posted March 4, 2015 Good stuff! However at this point in sure you realize you have a Ford 8.8 rear axle and not a Dana 44 ;) Link to comment Share on other sites More sharing options...
Wiggilez Posted March 5, 2015 Author Share Posted March 5, 2015 yeah, I was looking at the pics and I was over looking at it today, I think it might actually be a 8.25, I saw it under the cherokee before they pulled it. oh well, live and learn :) Link to comment Share on other sites More sharing options...
Wiggilez Posted May 6, 2015 Author Share Posted May 6, 2015 so I've done a little work on my truck, mostly swapping steering parts to try and fix my DW (only things I can think of are swapping the tires for a set I know is balanced and getting an alignment.) (no pics :( ) but I also got around to swap\building the buckets for my jeep :). so I started with hacking of the brackets from my bench seat. then did the same to the cherokee ones no pics aging :( then welded the brackets to the bottom of the bucket seat frame then took it for a joyride since it legal now :D.... so that like part one of many done for this thing :D poser shot and my new background cause why not. Link to comment Share on other sites More sharing options...
Wiggilez Posted May 8, 2015 Author Share Posted May 8, 2015 pick up a MJ Dana 44 today. the place I was at said they had three, 2 AMC20 and one 44, but after 20-30 min of searching through their racks of diff we gave up and I "settled" for the Dana 44, I'll post a pic of it in the next few day :) Link to comment Share on other sites More sharing options...
Megadan Posted May 8, 2015 Share Posted May 8, 2015 Nice start to a project, but your title now has me singing "Woah Fat betty" instead of black betty. Link to comment Share on other sites More sharing options...
Wiggilez Posted May 8, 2015 Author Share Posted May 8, 2015 Nice start to a project, but your title now has me singing "Woah Fat betty" instead of black betty. Muhahahaha :P Link to comment Share on other sites More sharing options...
shelbyluvv Posted May 8, 2015 Share Posted May 8, 2015 Black Betty is my 86 with the Magnum V8 swap. Good to see you are making quick progess on your truck. Link to comment Share on other sites More sharing options...
Wiggilez Posted May 12, 2015 Author Share Posted May 12, 2015 MJ Dana 44 pics and sorry it took so long (I might have forgot) Link to comment Share on other sites More sharing options...
Wiggilez Posted June 3, 2015 Author Share Posted June 3, 2015 so I took my jeep for my first offroading trip of the year (and probably only :( ) snapped a few pics, nothing extreme cause I was alone. found this in the bush, taugh it was funny. one doesn't realize how sucky the 2.8 is till they try to offroad it. Link to comment Share on other sites More sharing options...
Crash Posted June 4, 2015 Share Posted June 4, 2015 So, are you actually doing a 4.0L swap? Because a SBC would be an easy enough swap. Link to comment Share on other sites More sharing options...
Wiggilez Posted June 4, 2015 Author Share Posted June 4, 2015 Yeah, I was. I actually have all the parts I need ( I think ). and was planning on starting the swap july first, But it going to be put on hold cause I'm moving and won't be able to take the truck with me :( Link to comment Share on other sites More sharing options...
Wiggilez Posted August 20, 2015 Author Share Posted August 20, 2015 well a lack of comanche hasn't quelled my lust of finding parts for it, today I picked up a chrysler 9 1/4" with 4.10 gears, LP dana 30 4.10 gears and adapter/spacers for the dana 30 to match the 5 5.5 bolt pattern of the axle. all for 100$ so i'm going to say good deal. the 9 1/4 has perches set for a cherokee so i'll have to change those out, I have a set of D44 perches that I'm hoping will fit. also tomorrow I will be picking up a MJ gas tank skid and fuel sending unit from another guy. I'll post the pics once I collected all the parts. Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 Live update #1 110km/h is too ambitious got death wobble Slowed back down to 95ish 250k left till calgary. Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 Live update #2 got DW agian kill the truck going to try and find out why. Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 Simple fix knocked the battery cable off thightned it anf I'm on the road agian. Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 195k till calgary Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 Live update #3 stopped to help someone with a flat. Link to comment Share on other sites More sharing options...
Wiggilez Posted October 11, 2015 Author Share Posted October 11, 2015 Live update #4 the clouds and rain are gone it now sunny and bleu skys. Things are looking good :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now