ftpiercecracker1 Posted December 17, 2012 Share Posted December 17, 2012 http://nashville.cra...3463477566.html Not sure its 7k worthy but my god its nice, :drool: what makes it worse is that i live only a stone's throw away. Link to comment Share on other sites More sharing options...
Dadinator Posted December 17, 2012 Share Posted December 17, 2012 I feel ya. Been unemployed for 6 mos. If you poor, quit looking at craigslist. :dunno: Link to comment Share on other sites More sharing options...
TylerJY Posted December 17, 2012 Share Posted December 17, 2012 The only way I could pay 7k is if it had the following: 4.7 Supercharged Stroker w/ 0 miles on it. Rebuilt tranny w/ 0 miles on it. Atlas Transfercase w/ 0 miles on it. Full 97+ swap with no flaws and custom gauges D44 front and rear, 100% rebuilt Locked front and rear Flawless paint Then we could talk 7k. Link to comment Share on other sites More sharing options...
ftpiercecracker1 Posted December 17, 2012 Author Share Posted December 17, 2012 I feel ya. Been unemployed for 6 mos. If you poor, quit looking at craigslist. :dunno: and ya i probably should quit going on craigslist. Link to comment Share on other sites More sharing options...
ftpiercecracker1 Posted December 17, 2012 Author Share Posted December 17, 2012 The only way I could pay 7k is if it had the following: 4.7 Supercharged Stroker w/ 0 miles on it. don't forget the nitrous! :D Rebuilt tranny w/ 0 miles on it. Atlas Transfercase w/ 0 miles on it. Full 97+ swap with no flaws and custom gauges D44 front and rear, 100% rebuilt Locked front and rear Flawless paint Then we could talk 7k. Same thing here, i was thinking maybe 4k but even thats pretty freakin steep. Link to comment Share on other sites More sharing options...
Keyav8r Posted December 17, 2012 Share Posted December 17, 2012 There''s a good looking one on CL Birmingham (Leeds, AL) for about $4500. I could almost see myself paying $4500 for that one if all my money wasn't invested in stuff like food and shelter. Link to comment Share on other sites More sharing options...
88whitemanche Posted December 17, 2012 Share Posted December 17, 2012 http://tampa.craigslist.org/hdo/cto/3474528791.html. ....I work and even looking at this hurts pretty good on price but I'm soooo broke on Christmas gifts!!!!! Link to comment Share on other sites More sharing options...
Comanche County Posted December 17, 2012 Share Posted December 17, 2012 The only way I could pay 7k is if it had the following: 4.7 Supercharged Stroker w/ 0 miles on it. Rebuilt tranny w/ 0 miles on it. Atlas Transfercase w/ 0 miles on it. Full 97+ swap with no flaws and custom gauges D44 front and rear, 100% rebuilt Locked front and rear Flawless paint Then we could talk 7k. I think you're looking at upwards of 20-30K with that list. Link to comment Share on other sites More sharing options...
TylerJY Posted December 17, 2012 Share Posted December 17, 2012 I think you're looking at upwards of 20-30K with that list. I never said rust-free ;) Link to comment Share on other sites More sharing options...
Alexia Posted December 18, 2012 Share Posted December 18, 2012 I think you're looking at upwards of 20-30K with that list. Yeah, I am already $10,000 into my project and not even at the paint phase yet. Link to comment Share on other sites More sharing options...
jimoshel Posted December 18, 2012 Share Posted December 18, 2012 I got a maximum of $500 tied up in my DD MJ. It starts when I want to and it goes where ever I want it too. Doesn't give me any trouble and is easy on gas and maintenance. Just can't understand why any one would even think about spending a couple grand on any machine. :yes: :hmm: Link to comment Share on other sites More sharing options...
Comanche County Posted December 19, 2012 Share Posted December 19, 2012 Haha, I'm about to rattle can mine. Just can't take the flaking clear coat any longer. Link to comment Share on other sites More sharing options...
ftpiercecracker1 Posted December 19, 2012 Author Share Posted December 19, 2012 Yeah, I am already $10,000 into my project and not even at the paint phase yet. If its not asking to much, i would love to see a build sheet of your motor. :peek: Eagle rods, Ross or KB pistons, Scat billet crank, am i close? 8) and FWIW i will probably spend $2500-2700 on the next go round and thats nothing fancy, at all. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted December 22, 2012 Share Posted December 22, 2012 I think you're looking at upwards of 20-30K with that list. 10 maybe 12K for that list, never get paid for labor cost. And the other one, seen nicer on here for less. (clean, stock lookin) Link to comment Share on other sites More sharing options...
Alexia Posted December 29, 2012 Share Posted December 29, 2012 If its not asking to much, i would love to see a build sheet of your motor. :peek: Eagle rods, Ross or KB pistons, Scat billet crank, am i close? 8) and FWIW i will probably spend $2500-2700 on the next go round and thats nothing fancy, at all. I tried to keep my costs as low as possible and reuse where I could. The trashed valve seats set me back more than I wanted. Deck lowered 0.020" 4.0 connecting rods - Ground for the KB pistons Bored 0.060 Over - $555(Work for this and above) 258 Short Nose Crankshaft - $100 Keith Black IC944-060 Pistons with molly rings - $500 MOPAR Purple Performance P4529229AD Camshaft - $227 Rebuilt stock head - $310 $1,692 - If my stock head was not trashed this would have been much cheaper. I searched all over for deals. Probably about $2,200 when including gaskets and other items such as intake and exhaust. Deck Clearance: .0015 Combustion Chamber: 55cc Bore: 3.935 Stroke: 3.895 Piston Dish: 21cc 10.03:1 SCR, 8.75:1 DCR at sea level. Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 29, 2012 Share Posted December 29, 2012 Hope she doesn't ping too bad for you. Going to use a bit thicker head gasket? Link to comment Share on other sites More sharing options...
Alexia Posted December 29, 2012 Share Posted December 29, 2012 Hope she doesn't ping too bad for you. Going to use a bit thicker head gasket? Even if I did it would only reduce the SCR to 9.94. The shaved cylinder head from Clearwater/Odessa Cylinder was a frustrating discovery. 1cc of combustion chamber loss is about 0.11 of SCR increase in my setup. When I get the cheap supercharger on there I will be definitely making trips all the way across the city to Kangaroo to get 93 octane. Still, I am managing to be really cheap with all of this. Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 29, 2012 Share Posted December 29, 2012 I didn't know Kangaroo sold 93 octane. And of course there are always good octane booster additives around if you need. I have to burn at least 89 octane or it pings pretty good. CR is right at 9.00. Would love to have the Hesco alloy head........... Link to comment Share on other sites More sharing options...
xjrev10 Posted January 1, 2013 Share Posted January 1, 2013 I feel ya. Been unemployed for 6 mos. If you poor, quit looking at craigslist. :dunno: I'm not 'poor' but CL is very bad when I don't NEED anything. Seems everytime I log in and search for anything MJ related, it comes home. I stay the hell off there. Link to comment Share on other sites More sharing options...
jeepbus Posted January 1, 2013 Share Posted January 1, 2013 That thing has been for sale here locally for a while,no way would I pay that for that truck! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now