Will JB Weld fix this?

[IDXJ]

Image Not Found

Maybe we'll just do the 205 swap now....

[watchamakalit]

I don't think JB weld alone will do it. Shove some duct tape into it before it cures to add lateral strength and you should be good. :cheers:

[BLHTAZ]

:eek: Good God man... What kind of vehicle is that and how did you manage to split the t-case that badly?

[jbhill]

easier to check ur fluid level now.

[mfpdm]

:eek: Good God man... What kind of vehicle is that and how did you manage to split the t-case that badly?

 

Hhmmm, it has a V8 most likely and seeing a side saddle gas tank, I'm think something in the General Motors category. But hey I'm just guessing. I bet that scared the hell out of you when it went. :eek:

 

:cheers:

[Pete M]

Also a low-pinion passenger side front axle. Yup, I'd guess a Chevy truck.

[IDXJ]

My son's K20. He was pulling out of the driveway and BOOM!!!

Looks like one of the planetaries grenaded possibly.

At least he wasn't rolling down the highway.

[CWLONGSHOT]

Ouch, now THAT will leave a mark!!

 

CW

[Drahcir495]

:eek: I am so glad you posted pictures. Crazy - Rich

[summerinmaine]

That should buff right out! :brows:

[gixxerman600]

Ducktape and bubblegum it'll be good as new :rotfl2:

[IDXJ]

I guess this is what happens when you remove the factory t/c brace and wheel it. It never had the brace as long as we have had it so, I'll just blame the P.O.

[pingpong]

I am impressed :D

[wooky48]

Ducktape and bubblegum it'll be good as new :rotfl2:

 

Don't forget the baling wire and staple gun :brows:

[CypherWulf]

Ducktape and bubblegum it'll be good as new :rotfl2:

 

Don't forget the baling wire and staple gun :brows:

 

Nah, it's not bad enough to pull out the heavy equipment!

[james750]

Gorilla Glue! :D

[Oizarod115]

:popcorn: