fiatslug87

I still don't understand your initial point. Why would you purchase the right side if you need the left, even if you have multiple trucks???

I think that’s why the driver side panel has that cut out, it’s already done for you.

Ferrari 488, 11/11/2021 Benicia, CA

That looks like a pretty good job, better than 80% of bumpers out there.

^^^ A Classic!

Welcome, please add it to the registry and someone will get you build information. https://comancheclub.com/forum/32-1989/

Have you checked the O2 sensor? Resistance between A&B should be 5-7 ohms. EGR system testing is in this post.

At today's gas prices that really sucks!

You want @eaglescout526

It looks like that's coming off your EGR valve transducer. One end coming off the top of the transducer goes to the EGR valve and the other to part of the vacuum line harness. If you don't have the actual harness I suggest you get it, Cruiser's tips has all the part numbers for it. Look at the end of this post for some pictures of the vacuum harness.

I've used chrome polish and a microfiber cloth with good results. I let the polish sit for a while before rubbing it.

October 2021 update, see first post. 25 new additions this month for a total of 1658.

@Maveric Spotted this one at a yard in Elm Mott, TX 1988 2wd with column shift automatic.

If it's a three piece it's a slider, fixed were a single window. Is the track all gummed up? It slides towards the passenger side to open.

Thanks for the update, looks GREAT!! What roof rack is that?

If you apply 12v to your old pump directly does it spin? Nothing goes on that lower part.

Used it as a training aid.

It's at Pick-N-Pull

@eaglescout526 Bueller, Bueller

What a , everyone knows the hinge should be horizontal.

Look in here:

Are you trying to put this in your '88?

Congrats!!! So, what did you do???