pitbull4x4

Ever get some pictures

Those look nice. Might look into getting some

I have a headliner and live just south of Fort Wayne. let me know if you don't find one. Sorry can't post pictures

Good luck on the speedo cable. Been looking for a 88 over the past 3 months and still no luck

Let me look this weekend if weather is ok to get to it. Trucks at guys house where we are doing the 4wd swap

I always make sure to brush the snow off of the lights on all the trucks we have. Yep I'm going to be very very careful not to scratch them

Thanks

I'm thinking of doing the SOA instead of 3.5 to 4" lift If I go the SOA am I missing any parts on this list. Front 30 and rear 35 Rear ---- U-bolts, shocks, extended brake line, bracket for shocks and u-bolts Front--- Springs, shocks, adjustable LCA and Trackbar, extended brake lines Not sure on UCA and dropped pitman arm if I need them And I will check the front end for parts worn out and replace

http://www.ebay.ca/itm/7x6-45W-6054-H6054-Cree-Sealed-Beam-LED-Crystal-Clear-Jeep-Cherokee-XJ-Headlight-/182369198575?hash=item2a760d21ef:g:S5cAAOSwnbZYFF5a&vxp=mtr Got these and they are great !!!!! I can actually see at night now

What year is your Comanche?? I'm not sure if any year will work I have a 88 Comanche that I'm scraping. It's has a 4.0, auto, 4x4, if this matters

Got some LED headlights

I found some LED headlights on ebay for $65 and work great. They have 15 LEDS (3 rows of 5) Work great and can see fantastic at night. Sorry but can't post any pictures

Hello from Decatur, Indiana There is a guy in town that has a Comanche for sale. It's a 2wd but from what I have seen it is clean and don't think it has any rust problems.

That's great. Thanks

I put 2" pucks in the front already because of the rake. Just wanting to get it up in the air and put 33 inch tires it.

Might be able to get a few sets, will let you know

Ok, I have heard Rustys are not good. So I have a donor comanche that the 4wd is coming out of. Rear Frame was to far gone to use the truck. SO what parts do I need from both trucks to make a 3"AAL basted pack. Pictures would be great to see

That's a super nice looking Comanche, congratulations

I looked at Hell Creek, but at over $300 each is way out of my price range Am looking at the ones from Rustys

K. What rear spring would people say get ??? I'm not rich and will be a daily driver with some off-road

What's best the 3" add-a-leaf or get 3 1/2" rear springs and put rubber boots on coils?? I have 2" boots on the coils now to help with the rake

I paid $325 and drove my 89 4.0 auto long bed home. Had the normal rusted areas

So if I'm reading this correct I will have a 3" lift using the TJ front coils ?? If that's the case I need 3" springs for the rear ??

I had a guy give me front coil springs with a 4 inch lift out of a TJ, So I'm wanting to know what size lift of rear springs do I need. Thanks

Saw that also