sinkrun

Looks good thats exactly what I need to do. Off topic do you know if your wheels are the 7 inch or 8 inch ones?

If you decide to make these to sell put me on the list!

Had the same happen used a MAC brand easy out 1/2 rachet and ext bar, but first we found a rod that fit over the broke piece not into it and hit it a few times to "bump" if loose. Once we did this it came right out with the easyout. Keep everything lined up well no odd twist or jerks nice even and take your time. I was supprised mine came out as easy as it did.

These are very nice, http://www.macsradiator.com/replacmentj ... tanks.aspx

I had one shipped from FL to PA it was around $65.00 I think was UPS.

Check out stroker forums tons of info and I believe you need crank and rods.

I had the machinist tax also in pa when making what you did. Finally found a shop that paid more and was able to change it to "machine operator". Sad thing is Pa says there out of money so I hope I am wrong but I bet we will see this tax in the future here.

I like it! Would look great on my red truck have a spare set of tails have to try this on them.

MIne did the same exact thing after a motor change. We replaced everything finally after 2 weeks found a broken ground wire in the motor wiring harnes. This may not be it but could be??

I have had the truck 2 years and it sat all winter. I quess thats the cheapest thing to start with.

The last several times I drove the MJ I had to stand on the brakes to get them to work. However this goes away after few miles of starts and stops. The master cyl is pretty wet damp all over but dosen`t seem to be loosing much if any. I was thinking maybe a bad rubber line as all the steels were replaced in the past couple years. I have been doing ALOT of searching on upgrades however I am more confused know than before.

Flex plate may be loose also heard they crack, and welcome to the club.

Great to know thanks!

Nice vid thanks

I can't quit looking at that thing its awsome. I am glad to hear it brought what it did because if it would have only brought $2000.00 or so I could have came up with that. That would have made me sick :grrrr:

Bought a old valiant yeras ago that was full of Fleas have no idea why it was a clean closed up car with no food source for them untill I got in it.

:popcorn:

Have a link to this google thing? I will get the wife to copy and save and I may print it.

Thats great as I don't know with my limited skills if I could do it.

I do not know him I think he had contact info in the now lost site this really SUCKS if this is gone. Goes to show us that we should copy and save stuff. Someone on here may have I hope.

Anyone know how well there auctions are promoted? My quess it will got for either really cheap $1500.00 or way out at $7500.00.

Mine was falling of when I got my truck so it was easy to remove there a metal ring on the shaft that makes a friction fit. I just carefly pounded a new one on from the help section at the parts store it fit tight and was chrome and black. I would think pulling and twisting would remove yours unless it was loose like mine and some one used good epoxy and glued it on. Good luck.

Maybe pay someone from the shop you use to go with to look at it maybe take a scan tool?

Pete I am sure I could come up with some this summer cleaning houses out. In fact on that I did this winter I found right on top a pile of junk was opened to the page of the comanche Add as if it was a sign. :eek: Its the red one you allready have though. I do have the dealer posters I told you about the only MJ is a black one with roll bars and push bar IIRC I could send you a nice pic of it way to big to scan.