garyindiane

Ok. I started another project ( like I needed one ). It's a cargo basket that fits flush in between the bed rails. I made it so I can store all my gear and haul wood at the same time. Kinda like a roof rack for the bed. Still need to put a floor in it and have it blasted and painted. I really wanted to get rid of that POS plastic toolbox. so here is the pics. 55"X24". 3/8 poop pipe. 2"X1/4" Flat. Image Not Found Image Not Found Image Not Found Image Not Found So what da ya'll think? :thumbsup: Or :no: Sorry about the crapy pics. -Gary

Have a few but these are my favorites. Moss 500 12 ga W/Pistol grip ammo holding stock Image Not Found My Baby: Beretta 92G FS Police. Houge wrap around grips, Trijicon Sights, 4 15 round mags, and the original "Indiana State Police" grips. Image Not Found -Gary

The axles give the MJ a nice stance :thumbsup: -Gary

Well more pictures... I took a page from CW's book. Hope ya don't mind. Imatation is the Blah blah blah. ;) On to the pics Swing out tailgate. Image Not Found Image Not Found Checking for fit. Image Not Found Image Not Found Image Not Found I am pretty happy with it. I need to mount it and check everything. Then I can take it back to work to have it sandblasted and painted. And here is some tool porn. :D New tool crib at work. Image Not Found Image Not Found -Gary

Here is some more pics. I finally got my gauges. Some shots of me wheeling with my buddy in his bronco. Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found

:agree: This is a good page for sensor location and troubleshooting. http://www.lunghd.com/Tech_Articles/Eng ... ostics.htm -Gary

Very nice looking MJ, and a good choice for a first jeep. welcome to the insanity. -Gary

No not at the moment. Basically anything I encounter on a front corner will hit the tire first, or it will hit the center bumper section which is nice for my approach angle. I would like to add a center skid plate to protect my draglink and swaybar. I am more concerned with high centering it. I need to fab up some rocker armor. -gary

Why is it that all previous owners think they are electrical engineers :roll: :fs1: Nice project :thumbsup: -Gary

are you talking about your tummy :rotfl2: Why yeah, what else were you thinkin :hmm:

This is Crisco. I named her that in hopes that she would be fat :D She is a boston As a baby Image Not Found Image Not Found Now. She loves water. Even if it's muddy :doh: Image Not Found Image Not Found This is our other boston. Her name is Dimples. And she is fat :D Image Not Found -Gary

Me at work( The one to the right with the awsome bulge ) Image Not Found The manche Image Not Found -Gary

Some pics of the OBA setup. It consist of a some twin cylinder belt driven compressor my boss gave me. It does real well, and it stays pretty cool. The check valve and relay/pressure switch are from viair. 85 PSI on 110 PSi off. Front bumper is my tank. I still want to get a air manofold to clean everything up. Image Not Found Image Not Found Image Not Found Where it enters my bumper Image Not Found Some more poser pics :D Image Not Found Image Not Found Image Not Found -Gary

Well I recieved my full guage panel I got off e-bay. It was advertized as 88 to 91, and it is a 92 to 96. :mad: Mine Image Not Found The wrong one Image Not Found Side by side Image Not Found I am so pissed right now. I already had the new sending units. :fs1:

Thanks for the info. Your Mj look very nice doorless. :thumbsup:

Very nice turnaround on the interior. :thumbsup:

I don't have any new pics of the truck. Work has been to busy, But I have some work pics ya'll can stare at. BTW thats all Stainless :D Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found I work maintencace for a company that paints military vehicle parts. The first pics are of a washer we built. The outhers are of a paint pump I built. -gary

Thanks for all the positive feedback. I still have a metric ton of stuff to do to this rig. The list: Skids Swing out tiregate In cab guage for the OBA Double sheer Track bar and mount( I don't trust the rusty's one ). Alignment Cherokee doors Bed liner the inside cab and bed Maybe bucket seats winch setup The list goes on and on... Ps. The only thing the dog will fetch is 8 foot long tree branches. Not kidding :nuts:

Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found So what do y'all think?

1989 Mj 4.0 5 Speed 4x4 Rusty's spring pack 4.5" Homemade Bumpers/ Airtank front bumper OBA,GPS,CB Black Rock 16x8 4.25" BS Toyo open country A/T 265-75-16 I'm not much of a talker, and I know y'all are just her for the pics...So I'll let them speak. Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found

This might help you troubleshoot... http://www.lunghd.com/Tech_Articles/Eng ... ostics.htm -Gary

I have a set of stock front springs you can have cheap, and I live near haspin... PM or e-mail me. Garyindiane@gotsky.com -Gary

Here is my beast. 89 with 140,xxx miles 4.0L W/ 5 Speed Pukegoat and 231 Tc Picked it up for $800 Just finished a rusty's 4.5 Spring pack lift. Now I need some wheels and tires. Some Hillbilly RTI ramp action. :D -Gary Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found

I think your new thermostat is a bad one( Failed open ). Try taking it out and boiling it in water to test it. -Gary :cheers: Edit: maybe temp sender

Check this out. http://www.lunghd.com/Tech_Articles/Eng ... ostics.htm -Gary