88mjsally Posted December 17, 2023 Share Posted December 17, 2023 Parting out a rolled 1990 Jeep Cherokee. 4.0 auto np242. Transmission, transfer case and front axle are broken and pretty much every body panel is trashed. Interior is decent, woodgrain bezel is gone and I think I have a matching seat bottom for the drivers seat. Engine runs but not sure if I trust it sold: header panel gauge cluster lift springs and shocks power seats-$300 engine harness-$150 Vent windows-$150 SOLD Door panels-$160 for the front 2 anything else just let me know and I’ll come up with a price Link to comment Share on other sites More sharing options...
NRT_Chris Posted December 24, 2023 Share Posted December 24, 2023 I can use the dash switches for my fog lights Link to comment Share on other sites More sharing options...
Mark Serva Posted January 28 Share Posted January 28 How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com Link to comment Share on other sites More sharing options...
jpnjake Posted January 28 Share Posted January 28 28 minutes ago, Mark Serva said: How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com Most likely Dana 35 3.54’s Link to comment Share on other sites More sharing options...
Mark Serva Posted January 28 Share Posted January 28 Thanks but no, I really appreciate the response! Link to comment Share on other sites More sharing options...
eaglescout526 Posted January 28 Share Posted January 28 I think he already trashed this thing anyways. He rarely saves stuff that’s labeled as a boat anchor. Link to comment Share on other sites More sharing options...
88mjsally Posted January 30 Author Share Posted January 30 On 1/28/2024 at 2:50 PM, Mark Serva said: How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com Sorry but I did scrap it already, it was an abs d35 so it’s pretty much a boat anchor and I think it got damaged in the wreck. I have a few other axles around but need to check the ratios. What do you need? Link to comment Share on other sites More sharing options...
88mjsally Posted January 30 Author Share Posted January 30 On 12/23/2023 at 11:29 PM, NRT_Chris said: I can use the dash switches for my fog lights Sorry but both of them have broken faces Link to comment Share on other sites More sharing options...
Mark Serva Posted January 30 Share Posted January 30 Thanks for getting back to me that it's gone. And, yet, I'd agree D-35s are boat anchors. Yet. knock on wood mine has about 240K miles and still pretty quiet. Of course, it's only had a low torque engine moving it along. Thanks again! Link to comment Share on other sites More sharing options...
Joshua_A Posted March 5 Share Posted March 5 Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around? Link to comment Share on other sites More sharing options...
88mjsally Posted April 25 Author Share Posted April 25 On 3/4/2024 at 10:46 PM, Joshua_A said: Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around? No sorry, it was actually gone when I got the Jeep Link to comment Share on other sites More sharing options...
89 MJ Posted April 25 Share Posted April 25 On 3/4/2024 at 8:46 PM, Joshua_A said: Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around? I think I have one somewhere Link to comment Share on other sites More sharing options...
Goose_XJ88 Posted May 11 Share Posted May 11 Hopefully you saved those front seats, they look like they were in good shape and would have swapped over into an mj with mj bases Link to comment Share on other sites More sharing options...
88mjsally Posted May 16 Author Share Posted May 16 On 5/10/2024 at 8:18 PM, Goose_XJ88 said: Hopefully you saved those front seats, they look like they were in good shape and would have swapped over into an mj with mj bases I sold them locally to a guy who was going to put them in his mj. I try not to crush good useable parts unless they just really don’t sell well Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.