88mjsally Posted December 17, 2023 Posted December 17, 2023 Parting out a rolled 1990 Jeep Cherokee. 4.0 auto np242. Transmission, transfer case and front axle are broken and pretty much every body panel is trashed. Interior is decent, woodgrain bezel is gone and I think I have a matching seat bottom for the drivers seat. Engine runs but not sure if I trust it sold: header panel gauge cluster lift springs and shocks power seats-$300 engine harness-$150 Vent windows-$150 SOLD Door panels-$160 for the front 2 anything else just let me know and I’ll come up with a price
NRT_Chris Posted December 24, 2023 Posted December 24, 2023 I can use the dash switches for my fog lights
Mark Serva Posted January 28, 2024 Posted January 28, 2024 How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com
jpnjake Posted January 28, 2024 Posted January 28, 2024 28 minutes ago, Mark Serva said: How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com Most likely Dana 35 3.54’s
Mark Serva Posted January 28, 2024 Posted January 28, 2024 Thanks but no, I really appreciate the response!
eaglescout526 Posted January 28, 2024 Posted January 28, 2024 I think he already trashed this thing anyways. He rarely saves stuff that’s labeled as a boat anchor.
88mjsally Posted January 30, 2024 Author Posted January 30, 2024 On 1/28/2024 at 2:50 PM, Mark Serva said: How bout the rear end? Which type, ratio and miles would help. Thanks, MJ4Mark@yahoo.com Sorry but I did scrap it already, it was an abs d35 so it’s pretty much a boat anchor and I think it got damaged in the wreck. I have a few other axles around but need to check the ratios. What do you need?
88mjsally Posted January 30, 2024 Author Posted January 30, 2024 On 12/23/2023 at 11:29 PM, NRT_Chris said: I can use the dash switches for my fog lights Sorry but both of them have broken faces
Mark Serva Posted January 30, 2024 Posted January 30, 2024 Thanks for getting back to me that it's gone. And, yet, I'd agree D-35s are boat anchors. Yet. knock on wood mine has about 240K miles and still pretty quiet. Of course, it's only had a low torque engine moving it along. Thanks again!
Joshua_A Posted March 5, 2024 Posted March 5, 2024 Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around?
88mjsally Posted April 25, 2024 Author Posted April 25, 2024 On 3/4/2024 at 10:46 PM, Joshua_A said: Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around? No sorry, it was actually gone when I got the Jeep
89 MJ Posted April 25, 2024 Posted April 25, 2024 On 3/4/2024 at 8:46 PM, Joshua_A said: Man I was avoiding to ask about the wood gauge bezel before I saw you crushed it. Any chance you kept it around? I think I have one somewhere
Goose_XJ88 Posted May 11, 2024 Posted May 11, 2024 Hopefully you saved those front seats, they look like they were in good shape and would have swapped over into an mj with mj bases
88mjsally Posted May 16, 2024 Author Posted May 16, 2024 On 5/10/2024 at 8:18 PM, Goose_XJ88 said: Hopefully you saved those front seats, they look like they were in good shape and would have swapped over into an mj with mj bases I sold them locally to a guy who was going to put them in his mj. I try not to crush good useable parts unless they just really don’t sell well
Recommended Posts
Archived
This topic is now archived and is closed to further replies.