Manche757 Posted September 14, 2019 Share Posted September 14, 2019 Someone selling the chrome bumper claims it would fit several different trucks, including a Comanche. Anyone recognize who the manufacture might be? Also, if there might be a front chrome bumper that matches. 62 inches wide. Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 14, 2019 Share Posted September 14, 2019 Think that's an older dakota bumper. Sent from my SM-G973U using Tapatalk Link to comment Share on other sites More sharing options...
eaglescout526 Posted September 14, 2019 Share Posted September 14, 2019 Honestly those Dakota bumpers don’t look too terrible for our trucks. You could get the Cherokee rear bumper end caps and put those on. But even those Dakota bumpers aren’t reproduced. Link to comment Share on other sites More sharing options...
gogmorgo Posted September 14, 2019 Share Posted September 14, 2019 I'm not sure about that. The first gen Dakota bumper hooks around a bit at the ends, and the second gen has big plastic chunks on the bottom. The angle on the edge is opposite, as well. It also doesn't have the groove for that rubber trim insert. The centre section of that bumper looks very MJ, especially the reinforcement for the hitch, but the ends of it are wrong, the Comanche bumper is open at the ends and only covered off by the plastic trim piece. The S10 and Ranger bumpers have wider rubber trim strips on them, and I don't see rubber strips on any of the Japanese trucks. Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 14, 2019 Share Posted September 14, 2019 .Sent from my SM-G973U using Tapatalk Link to comment Share on other sites More sharing options...
Jeep Driver Posted September 14, 2019 Share Posted September 14, 2019 https://www.etrailer.com/Bumper/Westin/76001.html?feed=npn&gclid=Cj0KCQjwn_LrBRD4ARIsAFEQFKt_pFJU3vzVNR4qX5vjnO-OMm7R9w9lSDwNny1tghV89PAtQ8x2-54aAhPXEALw_wcB Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 22, 2020 Share Posted July 22, 2020 Manche I found you're thread for ya. Link to comment Share on other sites More sharing options...
Manche757 Posted July 22, 2020 Author Share Posted July 22, 2020 Thanks Daeson. I could not find it Link to comment Share on other sites More sharing options...
Manche757 Posted July 22, 2020 Author Share Posted July 22, 2020 Anyone have any updates on suggestions? I am going to have an 89 MJ body worked and painted. Since new rear bumpers are not available, I want to find a new chrome one that is stronger than the original one but looks like it blends with the truck. Comments on what will be needed for brackets is appreciated also. Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 22, 2020 Share Posted July 22, 2020 12 minutes ago, Manche757 said: Thanks Daeson. I could not find it Welcome! Link to comment Share on other sites More sharing options...
87MJTIM Posted July 22, 2020 Share Posted July 22, 2020 Fay-Weston bumpers are about as close as you can get. Old v. New Link to comment Share on other sites More sharing options...
87MJTIM Posted July 22, 2020 Share Posted July 22, 2020 New mounted Link to comment Share on other sites More sharing options...
Manche757 Posted July 22, 2020 Author Share Posted July 22, 2020 6 hours ago, 87MJTIM said: New mounted What was involved in getting it mounted? Did it comes with any brackets needed? Link to comment Share on other sites More sharing options...
fiatslug87 Posted July 22, 2020 Share Posted July 22, 2020 You will need a set of brackets, this thread has some info. Link to comment Share on other sites More sharing options...
87MJTIM Posted July 23, 2020 Share Posted July 23, 2020 What Fiat says: you need the brackets to mount. A second set of hands would help, also. Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 23, 2020 Share Posted July 23, 2020 I was able to use the factory brackets when I installed my FEY bumper. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now