AzraeL Posted March 20, 2018 Share Posted March 20, 2018 I was told by somebody at a gas station that a Ford Ranger sport bed would fit on the short box Comanche. Could any one confirm that? I haven't seen anything about it in my searches. My bed is pretty rotted up on the sides. Should I look for a ranger bed or repair the sides? I don't have a big budget by any means. Lol. It needs the outer walls above the wheels and the inner wheel well on one side, maybe both. I was thinking for a repair that pop riveting or welding sheet metal bent/cut to shape on both sides would work nice. After cutting the rot out of course, and make them the same on both sides so it doesn't look absolutely terrible. Any thoughts? Link to comment Share on other sites More sharing options...
Dzimm Posted March 20, 2018 Share Posted March 20, 2018 If you are thinking it will bolt right up on the back of an MJ that is not the case. Yeah I'm sure it would physically fit behind the MJ cab and the wheel wells may line up halfway decent but it would require fabrication work to mount it. There is an MJ swb bed for sale in the classifieds right now, maybe youre close to it? Have you considered building a flatbed? Link to comment Share on other sites More sharing options...
Pete M Posted March 20, 2018 Share Posted March 20, 2018 somewhere in our archives is a guy who mounted a 90s ranger bed to his MJ. it was a while ago though. Link to comment Share on other sites More sharing options...
NC Tom Posted March 21, 2018 Share Posted March 21, 2018 19 hours ago, Dzimm said: If you are thinking it will bolt right up on the back of an MJ that is not the case. Yeah I'm sure it would physically fit behind the MJ cab and the wheel wells may line up halfway decent but it would require fabrication work to mount it. There is an MJ swb bed for sale in the classifieds right now, maybe youre close to it? Have you considered building a flatbed? I second the flatbed over a Ranger bed. Personally, a flatbed would/could be very useful, look more custom and you have many options to build what works best for your budget. The lines of the Comanche are distinctive for a pickup. Any other bed would look Frankenstein-ed. The fabrication involved would likely be close to just re-skinning your stock bed. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 21, 2018 Share Posted March 21, 2018 19 hours ago, Pete M said: somewhere in our archives is a guy who mounted a 90s ranger bed to his MJ. it was a while ago though. Link to comment Share on other sites More sharing options...
coolwind57 Posted March 21, 2018 Share Posted March 21, 2018 49 minutes ago, HOrnbrod said: Wow, that's actually kind of decent looking. To each his own, but not bad. Link to comment Share on other sites More sharing options...
coolwind57 Posted March 21, 2018 Share Posted March 21, 2018 I'm sure he doesn't cringe as bad as we do when he backs into something and destroys a tail light lens. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 21, 2018 Share Posted March 21, 2018 8 minutes ago, coolwind57 said: Wow, that's actually kind of decent looking. To each his own, but not bad. If the Ford bed rear wheel well openings were squared out to more closely match the MJ fronts, it would look real good. Even the fuel filler door looks right. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 21, 2018 Share Posted March 21, 2018 3 minutes ago, saveevryjp1998 said: I just thought about the tailgate? No way in hell could it say Ford and not Jeep. I will figure that part out for sure. It's just a badge, not stamped letters like the MJ tailgate. Link to comment Share on other sites More sharing options...
coolwind57 Posted March 21, 2018 Share Posted March 21, 2018 3 hours ago, saveevryjp1998 said: I'm in just made up my mind and am for sure gonna try this. I am gonna go ahead and pay for it with 2 more sets of mj tail lights I was considering selling so changing my post now for those who have been hounding me. For sure, document your project and take tons of pics. Especially curious of how to best mount to the MJ frame Bolts, holes and mounts lining up would be too good to be true. Link to comment Share on other sites More sharing options...
gogmorgo Posted March 21, 2018 Share Posted March 21, 2018 Get the J E E P stickers from Jeepstickers.com. The ranger bed looks like it would almost go better with the '97+ front end than the MJ rear. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now