MancheKid86 Posted June 20, 2019 Author Posted June 20, 2019 new header showed up, waiting on a few more bits then the engine is finished! i cleaned and spray tested each injector prior to installing them in the manifold here is some more pictures
MancheKid86 Posted June 22, 2019 Author Posted June 22, 2019 the rest of my bits showed up for the engine put the new harmonic balancer on and was able to index the distributor started up on the sheet metal again, made my fire wall repair patch, just need to roll/shrink the edge for the pinch seam and start to fit it. gave the top of the unibody a quick grind to remove any galvonizing and sprayed some zinc weld thru primer in prep for the new pans. removed the rock sliders to be replaced and it also made the acess to start the rocker repairs that much easier! it is slightly crusty in there, ill see how much of it is left after a bit of a wire brush XD
MancheKid86 Posted July 21, 2019 Author Posted July 21, 2019 Well its been a little while since i made much progress on the truck. i have the passenger repairs almost finished, just need to trim my newly made floor pan a bit more and can start welding it all together. my neighbor is a legend, spent about 6 hours with me forming the passenger pan and rolling it smooth it turned out great! as you can see i messed up and cut it a bit short off the sheet so i had to add some more metal back in but other than that I'm very pleased with the home made floor pan. here are some pictures, will have more soon
MancheKid86 Posted July 21, 2020 Author Posted July 21, 2020 Floor is all welded in. Took a break to go back for some schooling and now time to get back on the build. Will edit this post once I find all the photos and post in coresponding order. Sending out the truck to get media blasted within a weeks time
MancheKid86 Posted September 1, 2020 Author Posted September 1, 2020 Got the call they had the time to blast the jeep, $340 to do the entire shell looks like its time to put the frame stiffeners on and paint!
fiatslug87 Posted September 2, 2020 Posted September 2, 2020 20 hours ago, MancheKid86 said: Got the call they had the time to blast the jeep, $340 to do the entire shell That seems like a total bargain, especially if it's Canadian dollars!
MancheKid86 Posted September 10, 2020 Author Posted September 10, 2020 On 9/2/2020 at 11:55 AM, fiatslug87 said: That seems like a total bargain, especially if it's Canadian dollars! sure was. at this point i am cutting and fitting frame stiffeners, have a booking at the bnb so here is where ive stopped until they leave. i had a bit of repeated arc blow by the leaf perch so i will try to wrap the ground around the frame a few times and reweld it after i grind it out. i will be touching up the plug welds and grind them to make everything flush. still have alot of welding to go
Swampy Posted September 19, 2020 Posted September 19, 2020 I should redo my floor pans. will just add it to the to-do list. Also can't wait to see your truck painted, that media blasting came out great
A-man930 Posted November 20, 2020 Posted November 20, 2020 Great job on that floor pan. I feel your pain!
MancheKid86 Posted August 25, 2022 Author Posted August 25, 2022 Been a while since an update has happened. recently I have been inspired to "finish" the truck last of the frame stiffeners installed removed majority of the seam sealer in problem areas I ended up finding a MINT (for this area) lwb box so i promptly sold my other one off broke out the laser line and marked my lines and got straight to cutting
MancheKid86 Posted August 25, 2022 Author Posted August 25, 2022 Part 2 of update all the to do's Started chasing bondo and pulling dents. the A pillar was too far gone, I ended up replacing it with another one, even brazed the joints just like factory the roof had a forearm sized dent from a cherry tree I am happy with how much of it i was able to pull back out finally drilled those drains back open Then I sent her off to get mediablasted and paint. stripped the axles and suspenion off at their yard to get painted as well. can't wait to get it back to start assembly Edit: Thanks Pete
Pete M Posted August 25, 2022 Posted August 25, 2022 when you edit, you need to delete the photo in the text, but then also delete the photo from the group of them below the text box.
MancheKid86 Posted August 25, 2022 Author Posted August 25, 2022 finally bit the bullet and ordered the 4 link from Andy at ironman4x4fab!
MancheKid86 Posted August 29, 2022 Author Posted August 29, 2022 out of the 10 packages coming from rock auto I hope to get Brents Comanche mangnet once again. (Co worker stole mine knowing it was the only one i cared about) may have gone a little crazy with ordering parts. they arrived! Spoiler
MancheKid86 Posted September 13, 2022 Author Posted September 13, 2022 Got the call! I think it turned out great, still need to do body work on the b pillars and roof but atleast the whole thing is sealed. they used endura 3:1 primer and some industrial gloss black ontop. enough of the talk here's what you came for. will have more soon
MancheKid86 Posted February 18, 2023 Author Posted February 18, 2023 spring is here finally, and so is the long arms from Iron Man 4x4 Fab Andy is great to deal with, and even had him powder coat the kit for me. I think it turned out wonderful. just need to ensure it is 100% lined up before it burn it into place.
Swampy Posted June 28, 2023 Posted June 28, 2023 If I ever 4 link the rear of mj that ironman kit looks to fit perfectly!
MancheKid86 Posted December 30, 2023 Author Posted December 30, 2023 not much of an update but atleast it looks cool right? need to undercoat and paint it before I reassemble
neohic Posted December 31, 2023 Posted December 31, 2023 4 hours ago, MancheKid86 said: … but atleast it looks cool right? Sure does!
MancheKid86 Posted August 27, 2024 Author Posted August 27, 2024 Not sure what happened, but couldn't log in for months. couldnt reset/recieve reset. and didnt accept my password. fast forward to now. put same password in and BAM logged in. strange.... here is a picture of what I am working on now. Maybe tonight I will take sometime and upload my progress, since I can log in again. PS.... that mint longbox I cut up was a bondo betty of a lemon, So Its okay it got the grinder treatment. don't worry. the box is cut and folded on the lowers
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now