earl*t Posted February 3, 2013 Share Posted February 3, 2013 This is my second Comanche acquired in 2011. It will be another long term project. Its an 89' purchased from the local salvage yard. I waited an entire year before submitting to their price during which time it continued to function as their yard transporter. Cost me a few more dents and dings. Don't know how they managed to come up with a clear title but it made tags and registration easier for me. It came with wagon spoke wheels, dry rotted rubber, some 22 shells, a little less than a buck in loose change, lots of mud, and a rusty roll bar. I added the Rock Monster bead locks and wrapped them with 32" BFG KM2s. I enjoyed it for a summer and then set about to resolve the too audible chain slapping in the 242 transfer. Went to the garage to pull the said case and when I returned to the house, the transfer case, transmission, and front axle were no longer married to the unit. This was followed by pulling the engine, my first such forey. :hmm: Sooo...another adventure begins! Link to comment Share on other sites More sharing options...
RockinMJ Posted February 3, 2013 Share Posted February 3, 2013 Nice. Love the wheels and tires. Link to comment Share on other sites More sharing options...
earl*t Posted February 4, 2013 Author Share Posted February 4, 2013 Mig welded inner fenders where quick disconnects punctured both sides. The engine bay and frame rails get a makeover. Link to comment Share on other sites More sharing options...
earl*t Posted February 6, 2013 Author Share Posted February 6, 2013 Replacement motor mounts. Of the bullet proof varity. Shipped my steering gearbox to Azle, TX for a complete rebuild and assist ports at PSC Motorsports. Link to comment Share on other sites More sharing options...
huricane4 Posted February 7, 2013 Share Posted February 7, 2013 Nice engine bay! Link to comment Share on other sites More sharing options...
Guanaco.13 Posted February 9, 2013 Share Posted February 9, 2013 nice build :thumbsup: Link to comment Share on other sites More sharing options...
earl*t Posted February 11, 2013 Author Share Posted February 11, 2013 Gave the engine a little attention. Alot more work to do. Link to comment Share on other sites More sharing options...
Dirteatr717 Posted February 11, 2013 Share Posted February 11, 2013 Saved another one! Doesn't look to be too beat up! Just wondering you got the box tapped for assist ports, what are your plans for the truck? Link to comment Share on other sites More sharing options...
buffalob Posted February 11, 2013 Share Posted February 11, 2013 Damn Earl you do clean work If I was not already jonesin for a garage...I most certanly am now. Amazing clean builds... both your works in process. I are humbled.... Link to comment Share on other sites More sharing options...
earl*t Posted February 11, 2013 Author Share Posted February 11, 2013 My initial idea was to have the option of brake assist or of course steering. I think the brake route is over kill but I haven't entirely ruled it out yet. The overall plan for this build is a reliable dd with bullet proof offroad capabilities, without breaking the bank. I know...how do you accomplish that? The real trick for me is to not have the Comanche totally disabled for extended periods of time.Thank you Mr. Bob. I'm kinda OCD. :rotf: Link to comment Share on other sites More sharing options...
buffalob Posted February 11, 2013 Share Posted February 11, 2013 My initial idea was to have the option of brake assist or of course steering. I think the brake route is over kill but I haven't entirely ruled it out yet. The overall plan for this build is a reliable dd with bullet proof offroad capabilities, without breaking the bank. I know...how do you accomplish that? The real trick for me is to not have the Comanche totally disabled for extended periods of time.Thank you Mr. Bob. I'm kinda OCD. :rotf: OCD...gee ya think??! Well it takes one to know one Earl, and I'm guilty as hell. (ya know, funny thing, when my wife says that about me, she makes it sound like a bad thing) Keep doing that voodoo that you do...cuz from here it is @#$%in spectacular brother. Link to comment Share on other sites More sharing options...
earl*t Posted February 14, 2013 Author Share Posted February 14, 2013 The upper and lower control arm brackets were removed. After removing the upper brackets, I'm of the opinion that they provided a significant measure of structural integrity. So I'll be adding additional frame support before installing the Clayton 4-link long arm. Link to comment Share on other sites More sharing options...
earl*t Posted February 18, 2013 Author Share Posted February 18, 2013 This is the project I want to be devoting my attention to but I've commited my time and resources to finishing the 89 Eliminator first. Not so bad for a jy save? Shabby chic, no fabric, just foam. Link to comment Share on other sites More sharing options...
earl*t Posted November 16, 2013 Author Share Posted November 16, 2013 It's time to pull this one out of the moth balls. Finally got around to mocking up the long arm. Link to comment Share on other sites More sharing options...
collkid Posted November 16, 2013 Share Posted November 16, 2013 Thing has potential to be one of the greats... Link to comment Share on other sites More sharing options...
CommaComanche Posted November 22, 2013 Share Posted November 22, 2013 Can't wait to see this one come together. Your attention to detail amazes me. Link to comment Share on other sites More sharing options...
jbain Posted November 22, 2013 Share Posted November 22, 2013 Right On Earl..... Link to comment Share on other sites More sharing options...
ComancheKid45 Posted November 23, 2013 Share Posted November 23, 2013 :popcorn: Link to comment Share on other sites More sharing options...
knever3 Posted November 23, 2013 Share Posted November 23, 2013 Ya know I realized that the track bar and mounting points need to be REALLY strong when lifting with that type of long arm kit. I'm sure it will ride a lot nicer with that setup. Link to comment Share on other sites More sharing options...
earl*t Posted November 24, 2013 Author Share Posted November 24, 2013 Thanks for checking out the build guys! It's been going stupid slow. I've had multiple interruptions recently. Hopefully I can get things rolling during the holidays. Doubtful though, we'll be traveling south Christmas week. Today was spent rearranging the garage, had to make room for the lawn tractor/snow blower. Our area is under it's first winter storm warning of the season. I need more MJ space...or fewer MJs. :shake: It was necessary to temporarily move the project outside. The doors had been removed in preparation of the newer style and I had scavenged parts for the Eliminator project. The glass was also removed making the tarp necessary. Link to comment Share on other sites More sharing options...
earl*t Posted November 29, 2013 Author Share Posted November 29, 2013 Got a little tranny refresh in the works. A little assistance required. http://comancheclub.com/topic/41074-trans-phuzzion/ Link to comment Share on other sites More sharing options...
earl*t Posted November 30, 2013 Author Share Posted November 30, 2013 Got a little clean up done...and a surprise. :hmm: Link to comment Share on other sites More sharing options...
knever3 Posted December 1, 2013 Share Posted December 1, 2013 Man I love those wheels!!!!! What kind are they? MJ bolt pattern? Thanks for checking out the build guys! It's been going stupid slow. I've had multiple interruptions recently. Hopefully I can get things rolling during the holidays. Doubtful though, we'll be traveling south Christmas week. Today was spent rearranging the garage, had to make room for the lawn tractor/snow blower. Our area is under it's first winter storm warning of the season. I need more MJ space...or fewer MJs. :shake: It was necessary to temporarily move the project outside. The doors had been removed in preparation of the newer style and I had scavenged parts for the Eliminator project. The glass was also removed making the tarp necessary. Link to comment Share on other sites More sharing options...
earl*t Posted December 1, 2013 Author Share Posted December 1, 2013 Thanks Kevin. They're Hutchinson Rock Monster bead locks, and yes, they're 5 X 4 1/2. Link to comment Share on other sites More sharing options...
dustyinthedirt Posted September 18, 2016 Share Posted September 18, 2016 So........ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now