Shandley Posted December 1, 2009 Posted December 1, 2009 Say, does anyone know where this clip goes? It's right by the master cylinder. It's not very long at all. It has a yellow/black wire and a violet/white wire. It seems to be all apart of the harness going into the cab. Where it goes from there is beyond me but before I go crawling under there, perhaps someone here could shine some light onto this for me. See pics here:
cracker Posted December 1, 2009 Posted December 1, 2009 Looks like it may be the wind shield wiper fluid bottle connector. :dunno:
mjeff87 Posted December 1, 2009 Posted December 1, 2009 it's for the "low washer fluid" light that came with the uber-rare Sentry module on some XJ's (maybe some MJ's too but I've never seen one before). I think.... :cheers: Jeff
WBKrazy Posted December 1, 2009 Posted December 1, 2009 mjeff is right.... it doesn't have to have the sentry though, some just have a low washer fluid light in the panel with the brake, seatbelt and 4x4 lights...
STERLING STINGER Posted December 1, 2009 Posted December 1, 2009 where else can you take a pic of a rusted clip and find out where its from......i love this forum!!!!! :typing:
Shandley Posted December 1, 2009 Author Posted December 1, 2009 where else can you take a pic of a rusted clip and find out where its from......i love this forum!!!!! :typing: I was just about to write that! Thanks to all who answered!!
mfpdm Posted December 1, 2009 Posted December 1, 2009 It is indeed for the low washer sensor however, it wasn't solely related to the sentry system. Different trim packages had it and the low fluid indicator is located right beside the check engine light on the warning light cluster. The XJ donor I used had it so I'll be able to hook up the sensor from my 97+ washer tank. It's power source comes from, of all places, the radio fuse. :cheers:
jpdocdave Posted December 2, 2009 Posted December 2, 2009 every xj and mj i've had i end up disconnecting it anyway because the light stays on wether its full or not.
Shandley Posted December 2, 2009 Author Posted December 2, 2009 I just looked at my reservoir and it says it's without a sensor in it right on top. lol.. no wonder its so dirty.
HOrnbrod Posted December 2, 2009 Posted December 2, 2009 Yep. When I installed the 97+ XJ washer bottle mod, I extended the connector and plugged it into the new XJ tank inside the fender well; works great. Really a "must have" indicator since you can't see the washer tank anymore. :eek:
SuperWade2 Posted December 2, 2009 Posted December 2, 2009 Yep. When I installed the 97+ XJ washer bottle mod, I extended the connector and plugged it into the new XJ tank inside the fender well; works great. Really a "must have" indicator since you can't see the washer tank anymore. :eek: Nice Avatar Don...The Surgeon General recommends that Dog's don't smoke too!!! :cheers:
HOrnbrod Posted December 2, 2009 Posted December 2, 2009 Yeah, I know Wade. That's my dog Gus the Cocker, and he's really gone over the edge since I had him neutered. He's not only attacking coyotes three times his size, swimming out in the lake and bagging the Canadian geese from underwater, now he's sneaking smokes. I caught him at it in the backyard, snapped a pic, and since he constantly stares at my monitor while I'm on CC (he's an MJ lover too), I figured if he sees his disgusting image as my avatar, he might change his ways. It's not working so far..........he's still smoking. I think he's getting his cigarettes from my neighbor. :chillin:
Oizarod115 Posted December 2, 2009 Posted December 2, 2009 :roll: alabamans... :roll: :cheers: just playin buddy.
1986Comanche Posted December 2, 2009 Posted December 2, 2009 Yeah, I know Wade. That's my dog Gus the Cocker, and he's really gone over the edge since I had him neutered. He's not only attacking coyotes three times his size, swimming out in the lake and bagging the Canadian geese from underwater, now he's sneaking smokes. I caught him at it in the backyard, snapped a pic, and since he constantly stares at my monitor while I'm on CC (he's an MJ lover too), I figured if he sees his disgusting image as my avatar, he might change his ways. It's not working so far..........he's still smoking. I think he's getting his cigarettes from my neighbor. :chillin: Don, That's just too funny... :rotfl2:
robfg67 Posted December 2, 2009 Posted December 2, 2009 I tried to get the wires from this connector and failed. Can anyone let me know how to connect the wires to make the dash light work? ...and yes, I have the correct resevoir.
HOrnbrod Posted December 2, 2009 Posted December 2, 2009 These connectors get really corroded, so clean the two contacts up real good with contact cleaner. The tank low level float is a NO switch, so short the two connector pins together and it should illuminate your cluster indicator bulb w. the IGN ON. If I remember correctly I had to install a new bulb in the cluster indicator panel; there wasn't a bulb there.
Shandley Posted December 2, 2009 Author Posted December 2, 2009 Yeah where do you get those bulbs?? I've never seen them before. I will try shorting them out and see what happens. Thanks!
HOrnbrod Posted December 2, 2009 Posted December 2, 2009 I think AutismZone has them. If hot, I have about 100 of them left over from gauge clusters I have worked in the past.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now