ComancheKid45

hopefully the nozzle doesnt break. Those things are as evasive to find as Cargo lights and NOS tail lights. I was amazed how much people wanted for washer nozzles.

Yep i have my PA inspection license, and i have been called "too leanient" plenty of times for rust related issues......The state has way too many grey areas when it comes to rust, so you can be as picky or leanient as you please.

Got the shafts setup with new bearings and seals and installed them this week, Everything went together well except the studs, i had to swap a few of the oem studs over due to poor fitment with the 1s included with the shafts......Should be sealed and good to go for the York Jeep Show! 2 more weeks :D

Looks great! I'm anxious to see how the wheels/tires set it off :thumbsup:

Well i knew the situation wasnt gonna get any better on the passengers floor board so i decided to tackle that this afternoon. Ive been fighting a water leak with this truck during hard rains, and all the matting and such under the rubber floor was soaked! :ack: Luckly i was suprised there wasnt much bad rot at all, a small hole i had to patch, I then cleaned it up a bit and hit it with a coat of hammered paint . That should hold it over for a good while ;)

That beast is anything but mini!.....Haha sweet Wheelin rig bud! The stance on that thing is intiminating.

Very Nice! The small lift should compliment it great!

I hate those things with a passion, but I will give them credit for their marketing ;)

Well to start off, purchase another new belt, belt dressings do nothing but gum up the channels and grooves and deteriorate the belt at a higher rate... Easyest place to start is to remove the sepentine belt and spin all the pulleys by hand and see what ya find out there ;)

Its definently not a dirtbike, but Ive been an avid Cross Country Quad Racer for many years ;)

:dunno:

Alrighty, its been alittle bit since Ive wrenched on this baby. Well with my Dana44 rear axle seals weeping for many months and with the York Jeep Nationals next month I finally decided to solve this issue. As usual a simple budget repair always gets out weighed by a chance to upgrade in my mind....Well this wasnt gonna be any different! Yep thats right, Chromoly Shafts! Ok, ill agree this may be a bit overkill for my application, but hey.....no use going through all that work for no upgrade! Muhahaha New retraining plates are on their way, then ill get these suckers assembled and swapped out.

Haha i swear ive seen this online before.... yeah i agree, poor fella

I Prefer the Jeep J12 concept personally ;)

I'm not too far from u.....ill keep an eye out for anything this direction

I Like it! Definently different but is very functional! Those LED bars are equally as badass!

Great work Ben!

http://comancheclub.com/topic/25257-project-tough-truck/ Hit up this fella. He has a leaf conversoin done on the front of his MJ. I'm sure he can help ya out :thumbsup:

I think the rear shocks are mounted upside down... Truck is pretty cool, Thats a great stance! Ill have my Blue Truck closer to that someday ;)

Check and clean ground behind the Drivers side tail light.....likely a bad connection there ;)

I'm planning to have 2 of my Trucks @ York this year....can't wait!

I think i have a set or 2 lying around also...... ill try and snap some photos later.

:doh: :rotfl2:

Looks like a good time!

Which one is Dad? Haha, my dad is on the left. Kind of an old photo 2....