88whitemanche

1. Your electric fan...is it installed with a spal controller? It mAy not be putting the correct output to spin the Fan fast enough to cool your system.... 2. You may have a blown head gasket...do a pressure to make sure it's not a blown gasket.... 3. How is your coolant tank lid?

Yes it does...I have a 32x11.5x15 under mine.... I think that's pretty much max in the spare tire location

You move the ring to the left so both axle shafts can be a one peice axle shaft instead of 2... The cover you would have to take out the lock rings inside and you would have to slide the fork over to place the lock ring to lock the fork in place so it doesn't slide if it decides to move one miracle of a day.... Put the cover back in its original position and your done and test it out...

This is why..... Do it and you'll never worry about being not in 4wd again... http://comancheclub.com/topic/17377-cad-fix-1/

Ok start with cruisers renix tips... All of these will help you diagnose your no start and help improve your truck.... http://comancheclub.com/topic/36382-cruisers-renix-tips/

If you can grab it for $300 or less - snag it. Do you know what ratio it has now? Don't know gear ratio But will go next Friday to grab it... And I'll inform you guys on it...

It is a comanche specific amc20....

What's up guys Saw an amc 20 last weekend and was scared to grab it because I didn't do much research to find out what involves to get it to 4.88s and a locker.... So school me on it.... I also have a lead on a xj44 but the comanche amc 20 idk about....

we can work something out...

Did you check your manifold bolts?

Crazy part about it is that the one I just picked up is a lot cleaner than the other 3 I have....

Trust me if I had the extra cash I would've grabbed it... I just grabbed the tail gate and picked up another dakota bellhousing and the external bearing for the ax15 swap.....

Beats doing the work.... I know I wouldn't attempt it...

What's up fellas.... Outlaw have a lead on a comanche by his area so I decided to drive up and man was it a long drive.... Well it was an 86 2.8 manual 2wd and the infamous amc 20!!!! Amc 20....

I got the hella 90-130 bulbs and they work with ease...only $7 a pce...

Just saw this today... Guy says he custom makes them Out of Cali... http://www.cherokeeforum.com/f74/cowl-hood-201746/

97+ plus header panels are easier to find where I'm located.... The fenders on the other hand are hard to match up because it's either have a pin hole dent or scratches you can't fix or just really messed up

Don't have the back side pic but that looks just about right for our 2.5.... Here's one I grabbed from Google....

I ordered one from him last December and barely gotten any response....he would always reply that he will ship it out monday....nothing! 6months later after seeing other members on cherokee forum not receiving their bumper as I wasn't either I got fed up and called my bank and made a report towards him and through pay pal and they returned my money.... Everybody who has received his bumper says it's worth the wait but 6+ months is ridiculous.... No bumper is worth that long of a wait.... Even if it's the right "budget" friendly bumper

Well the a/c isn't hooked up... The compressor is locked up its just there so I can run the serpentine belt if not I wouldn't have it there.... If money allows and other plans don't pop up I should be having a/c by next year...if not then I'm used to this Florida weather except when it rains....

It sure is!!!! Lol and I got lucky to just so happen to look at a dakota noticed that it was a manual one...popped the hood and the 2.5 was just sitting there.... What sucked was that I had to pull it in the pouring rAin but worth it....luckily I grabbed it that day because I went the next day to grab the clutch fork and other stuff and it was gone to get crushed.... Edit: check out the link to a ebay post in the for sale section there's one that the guy is selling for $200... Pretty steep but got be patient and hope to find one in the jy

96-98 Dakotas....

Man that tube work is outstanding....

http://m.ebay.com/itm/400799312570?nav=SEARCH

Lol...sorry I meant tight....