russel730

Link

I'll always be happily elitist against a wannabe lawyer spreading misinformation on illegal title washing tactics on YouTube.

Doesn't matter, it's a double negative and is grammatically a nonsense word. Still wouldn't trust anyone who claims to know law and uses the word but thanks for the input lol.

I don't trust anyone giving legal information who use the word "irregardless".

Got the decal set on from Phoenix Graphics.

Up to $19.5k with 8.5 hours left in the auction.

I'll do you one better. I found this plate on eBay from my truck's original dealer.

I really hope Harrison Ford is going to be the new owner because it belongs in a museum.

This looks like it it's going to be a real pricey truck. Already at $16k with 5 days left. 15k miles. Pretty impressive. https://www.hemmings.com/auction/1988-jeep-comanche-hawley-pa-158398

https://m.facebook.com/marketplace/item/6557304607667615/ Listed as 90k miles. Someone painted it with a paint roller but pretty clean considering it's in MI.

Thank you for the write up! My 1605 kit arrived yesterday. This is awesome.

They had a link with additional photos in the listing. More than enough to see what you're dealing with.

https://m.facebook.com/marketplace/item/566689285540650/ Looks really clean and reasonably priced for the condition. I'm crazy to consider this, right?

Well, they said they could make them then haven't said anything else is quite a while so fingers crossed 🤞.

https://www.ebay.com/itm/JEEP-IGNITION-LOCK-SWITCH-CYLINDER-1985-1986-1987-1988-1989-NOS-AMC-LOGO-KEYS-/314395009905?mkcid=16&mkevt=1&_trksid=p4429486.m46890.l6249&mkrid=711-127632-2357-0 Not cheap but there's a NOS "J" code cylinder with AMC logo keys on the eBays.

What's the chances that the o-rings are still good? You'd probably have to change them out to be safe after sitting all these years, right? I have a backup used injector and was planning on stocking up on rebuild kits to be more future proof knowing these injectors don't fail all that often. But in my eyes it doesn't get much more future proof then NOS.

https://www.ebay.com/itm/285013525864?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2xeLEv-2QuS&sssrc=2349624&ssuid=X_ndkjBdT4i&var=&widget_ver=artemis&media=COPY For my 2.5L brethren.

Glad to know it's helpful. I'm constantly on ebay looking at stuff I don't need JUST IN CASE I find something I might need...someday. I'll BOLO for a NOS Tach and will post if I find one. Always happy to help spend other people's money!

@ghetdjc320, is this still happening? Maybe I missed it but I haven't seen anything posted about this since your original post 3/30.

I've had an original design and now have the clock panel version. Love both but keeping the clock panel because it blends in to dash well. My water temp and battery dash gauges don't work so the REM helps by giving those readings. I haven't needed it for the other diagnostics but it's good piece of mind to have. It comes with a print out with an explanation of each reading and the normal ranges you should be seeing for each.

https://www.ebay.com/itm/334869987633?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=P5stATT4Rwm&sssrc=2349624&ssuid=X_ndkjBdT4i&var=&widget_ver=artemis&media=COPY Doesn't seem like a terrible price. Would be cool to do a full restoration and start over with a NOS odometer.

If you hadn't used it before, next time try Car-part.com. It's a database of junkyards around the country.

Pulled the carpet yesterday. All set to POR15 today and new carpet going in shortly. Not too much rust and only a handful of pinholes. Thank God I replaced the clutch master when I got the truck. Looks like it had been leaking for a bit. I think I'm going to cut that corner of carpet a little short so I can pull it back to inspect every so often. I think I have a big enough project here to finally get off my butt and start a build thread.

Honestly, I just want the cupholder for the bench seat...

.