eaglescout526

It’s a 2.5L cruiser.

Inside the bonnet is a check valve for the those two air lines. I have never found their true purpose. But it runs fine. When I got my MJ, the one on the manifold was plugged as the line was broke, same with the other one but I never noticed a difference since I added new lines

Controls for cruise can hide in plain sight if you are not familiar with GMs multi control turn signal stalk. The controls should be there. If no, then someone replaced it at some point with one that either controls your wipers with two speeds or the intermittent.

Update time!! Ok...what are we looking at? The same pic? Kinda, fuel lines are now missing and the EGR tube is now the EFI one. What about here? Easy! Fuel pump has been removed and the EFI distributor is now in place. I am getting closer to getting this XJ set up and ready. I am working on the fuel sending unit and removing the tank breather line to put in the EFI one. I also forgot to say that the ICM bracket is also in place and has been for a bit. All the holes lined up and no drilling was needed. AMC really thought this ahead.

I’d never haha. But that being said, I feel like there is no correct answer to this. Number 1 answer has to be put it where ever the hell you want.

Does this question pop up a lot?

I think I have a sanden rebuild manual that might be able to help.

Another control deck. Preferably a AC less Jeep.

Oh, you want one of those? I think I have a metric ton of the interior door handle bezels.

Ooook….it runs from the kick panel to kick panel tucked close to the firewall foam.

The path for the power doors runs the same as an XJ.

I’d get the bumper too. Doesn’t look bad and completely restorable.

Perfect! What you grabbed is perfectly fine. Shame about the liner, it’s the Comanche stamped one. I'm surprised to see another 86 XJ that’s power lock only. I’ve only seen one.

Back to what is commonly said around here. People throw away perfectly fine things.

Depends. They rarely pop up and when they do they go fast. $25+

Front license plate mount on the XJ is worth a snag too. Those sell very quick to any XJ and MJ person.

@boxyjeep

Yeah I can pay for shipping.

Shame it’s a short bed. You know what, I could make the moldings work for me.

We need some good pics of that Olympic decal to be reproduced. Surprised you didn’t grab the body moldings.

Ouch....thanks for that tidbit. You might have to experiment here.

I pressure washed mine clean. But if you’re gonna do soap and water, I wouldnt want to get the mechanism exposed to the water. Id try to drag all the material out and put a screw driver in the gear mech to get it to not retract all of the fabric while it gets cleaned.

I don't know where in the Phoenix area you’re looking but I’m over here in Glendale too. AZjeff will have more knowledge than I.

It’s a cable assembly That could be weak or has failed.

You might have to take the material completely off the seat to get to the whole assembly. Hang on I have a NOS assembly that’s bare that I can take a pic of.