87Chief

Never seen that*

I've never that before... is it from a comanche?

Some say its like a roofing material? Its in a 97+ swap thread in DIY section

Always wanted a bull mastif, had 2 labs so far, love em

You have to relocate spring perches on a 8.25 but another good swap is a ford 8.8 a little more work but some say its as powerful as a d44

Ok, thanks, that might be why my cruise control doesn't work... lol Also, I found where the wire that was plugged into the low beam lights (right behind the passenger headlight connector).. I tried my wiring, but still, blows the fuse.. I just packed it up and called it a night lol

So, would I just tie it into the head light switch itself? Anybody know where I should plug it into? Thanks

It is a 1987 4 cylinder and I'll be right back with the part number.. P/N 2700144

Sorry, but that first one is awesome! Jeep trailer bed :brows:

Ok, I am installing some fog light wiring, my grandpa's old wiring started to blow the fuse whenever I would turn them on, so i decided to get some new wiring in the Jeep.. I have some pictures of this electrical control box ( :fs1: ) and I'm not sure what wire is what.. In the pictures there a green wire(s) with some blue connectors to it, and I'm trying to figure out what it goes to.. Then the red wire has a label on it that says brown and red twisted for gas blah manual transmission blah blah....Is anyone familiar with these wires? I need to find the wire that connects the low beam so I can have my fogs on when I'm in low beam and off in high beam... Sorry for the long long story, but this wiring is very frustrating, I guess I need a haynes or chilton manual.. Pictures.. The "box" see the blue connectors? The "red wire" The "green wire with connectors on it, where it comes out of the box??" And the wiring I'm "putting in.." :banana: Thanks in advance everyone, I hope the pics help!!

I suggest to go to the junkyard and find a 2.5L aluminum valve cover.. I had the same problem you are, switched over and is good as new.

U Pull It here in Rock Hill, SC might have one... They had a long bed but not sure if the driveshaft was there..

I went to my dealer but it was $4 for the smallest thickness.. :(

Spiders aren't that hard to do.. JUst takes time, look it up on youtube.. Great place for that kind of stuff.

Hello I am in need of some caster shims (behind lower control arms) for my 87 2.5 MJ. I will probably.need 4mm on BOTH sides so if you have any or know where I can get some please let me know! Email is littlemlittle@gmail.com or PM me I'm in fort mill SC Thanks

Haven't done much to it.. Got my new speakers in from onlinecarstereo.com and going to get an amp soon.. Went to pick a washer and dryer today and I got tired of the plastic bed liner.. And just for some pics here is the washer and dryer we got for $100 (for the pair)

Awesome, getting one right now lol

I love that color blue.

If you ask them, sales lot, they should give you one..

Check your O2 sensor, and check your exhaust manifold for any cracks

that diagram helps a lot! I printed it :roll: :brows:

Thanks for the video. Great info thanks!

OK thanks guys. Just want to make sure.. I disconnect the speakers from the head unit (stock wiring) block those off and then wire the connectors on the speakers to the amplifier. Correct?

OK. Would I have to get a seperate connector? Or do I unplug speakers from head unit and put those wires to the amp? I'm sorry I'm new to the speaker thing.. :oops:

So, for the speaker wire outputs from the amp, go to the positive side of the speaker itself or..? Sorry for all the questions, and thanks so far! It's helped a lot