Jump to content

cruiser54

Members
 View Profile  See their activity

  • Posts

    9413

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by cruiser54

  1. cruiser54
    http://cruiser54.com/?p=257
  2. cruiser54
    You beat me to it!!
  3. cruiser54
    A guy was just here with a 98 XJ and his brackets look like the ones in the photo. Enclosed type.
  4. cruiser54
    Bolts right on.
  5. cruiser54
    I had a Limited I parted out that was 28mm. The brackets on the 28mm in the photo look like gC.
  6. cruiser54
    Yep. Not to mention the switches were prone to failure. They could light up like they were in Power mode but actually weren't Simple to do: http://cruiser54.com/?p=435
  7. cruiser54
    Is the 28mm bar and brackets from a Grand Cherokee?
  8. cruiser54
    Comfort setting sucks. Glad you're up and running.
  9. cruiser54
    I'm not a big believer in cracked exhaust manifolds causing a Renix to fail emissions. Any manifold you find will be cracked. They can be welded successfully by competent folks and last a long time.
  10. cruiser54
    Thanks for the update!! And mostly, glad to hear you passed. Is the idle better? Exhaust manifold still cracked?
  11. cruiser54
    thanks. I couldn't remember that term.
  12. cruiser54
    Hopefully the Delphi has the adapters/bushings in the kit like the Bosch.
  13. cruiser54
    15mm head. Goes into a "winged" nut.
  14. cruiser54
    It's 10mm.
  15. cruiser54
    The backfiring is lean pop through the intake because of lack of fuel. Bosch makes a great little replacement pump. I wish I had the part number at hand. I do!! BSH69302 at Napa.
  16. cruiser54
    And make sure your heater blend air door is adjusted correctly.....
  17. cruiser54
    What year is it?
  18. cruiser54
    I don't think so. IIRC, they were open system.
  19. cruiser54
    This^^^.
  20. cruiser54
    Just eliminate it with metal splices no matter what. No big deal what it is.
  21. cruiser54
    I have installed over 7 of these supplemental harnesses with nary a bulb failure. Even with 80/100s in my 90 MJ.
  22. cruiser54
    never added any but did the refresh when I put my truck back together Well then, I would click the link and upgrade the ground next. Let us know how it is.
  23. cruiser54
  24. cruiser54
    Here ya go: http://cruiser54.com/?p=211 Also, how are your main grounds? Ever refresh them and/or add some?
  25. cruiser54
    I'm sure the bulbs are designed for 13.8 to 14.2 voltage. They were lucky to get 10.5 before the harness. Not even an issue.
×
×
  • Create New...