mikejenn2

i do have a pair of springs i took out of my 91 LB. they are sitting around. let me know if you are interested. I'm in MN 55339

I put these on my truck 3 days ago an really enjoy them. http://m.discounttire.com/dtcs/findTireDetail.do?ra=searchTiresBySize.do&fl=&tc=KPBRA2&c=0&rcz=55339&pc=19514&ar=75&rf=true&rd=15&rc=MNMINT&cs=235 I'm sure you can get them in 31's I didn't want to go bigger yet.

I have two worries. One that I can't fit all of us in the truck and I would be going by my self if the other half and daughter don't go. Not to mention that I would be living in the camper when I get back. 2nd, I don't know if I want to depend on my 25 year old truck to tow a pop up camper 900+ miles one way. I just haven't had that much time behind the wheel yet.

well everyone here has the time off for the trip. I still don't know how I'm going to get 3 of us there with 2 seats maybe I will use the rear seat from the YJ and leave topper on. will be towing a popup camper down.

also helps to use a little dielectric grease. pardon my spelling of it.

iv always had good luck with Spicer. there are other things to take in account about bad u joints, tire size comes to mind right off hand over sized tires cause excessive ware.

I thought it was agreed on first weekend in aug.

I wonder how much that 404 will go for and how much it would cost to ship it here

my bad I forgot that was the reason your not in USA

there are plenty of bench seats in the junkyards. (I still haven't figured out how to past links here) but I searched www.car-part.com for our truck years and found a lot.

$350 purchase price $300 for parts and it has been on the road since.

I like how he lowered the spare tire so he lessons the blind spot.

if I understand what I have read, all I have to do is replace crank and rods. no other mods needed correct?

I don't have a 4.0 but I do have a 4.2 collecting dust, trying to decide if I want to use it for stroker parts or get new parts and get rid of the motor

I got a chuckle from that. hehe

have you tried to reinstall adobe flash player from there website? is it included with that? also could try Microsoft if using IE maybe the active x is in the browsers DL. these are some ideas off the top of my head. it is a little out of my league.

Only Comanche seats bolt right in

Mine I just opened the slave bleeder and let it flow till I saw no air. I didn't have to pump it. Make sure to keep the mc full.

a little off subject, but if the gas fell on a tar driveway keep in mind it will eat it up and turn the area into powder. may want to seal it up b4 it does.

for what it is worth the 1st 2nd work best for my vacation time.

if u pass through the metro on the way up I'm just west.

my front driveshaft was making that type of noise. it turned out to be a u joint.

take the shaft , put it on a block or something strong bench should work just as long as it will hang off the edge. take a 17 mm or so socket and pound on the one side of the ujoint making sure that u pull any "C" clips or snap ring out b4 hand pound till the other side comes out then flip it over and do the same if necessary. www.youtube.com/watch?v=8jpME2VD1oA

I am off work that first weekend. so yes it would be ideal for me as well, as I wouldn't have to use much vacation time. I work every other weekend. YES, I have my schedule for next year already lol.