Jump to content

TheDude

Members
  • Posts

    742
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by TheDude

  1. You mean Strauss? Sent from my iPhone using Tapatalk
  2. I've been looking for a nice set of Cherokee fender flares from a Country or Laredo that still have decent paint. I would also be interested in bumper ends in the same color. Thanks. Sent from my iPhone using Tapatalk
  3. The short bed in York is definitely a long bed. Shame he wants a fortune for it with the damage it has. Sent from my iPhone using Tapatalk
  4. I'm definitely coming to everything! Sent from my iPhone using Tapatalk
  5. I have a stack of OEM Jeep and AMC radios I can possibly bring. Sent from my iPhone using Tapatalk
  6. You can still guy them new on RockAuto. Sent from my iPhone using Tapatalk
  7. If you want to stay OEM I have one from an 86 2.5 manual trans. Sent from my iPhone using Tapatalk
  8. It's hard to see unless you know. Search here on the forum or post on the tech page and someone can explain it better. Sent from my iPhone using Tapatalk
  9. Yours is missing the spring that holds the pawl onto the gear for the ratcheting mechanism. Sent from my iPhone using Tapatalk
  10. Snag it for someone else with time! Some jackass with take it through the woods and ruin it. Sent from my iPhone using Tapatalk
  11. Krusty and I are getting a swap meet booth together so we'll be there for sure. Jeeps TBD Sent from my iPhone using Tapatalk
  12. Damn I want those door cards! Sent from my iPhone using Tapatalk
  13. Stop temping me! lol I already have eight Jeeps.. Sent from my iPhone using Tapatalk
  14. I want that so bad.. Sent from my iPhone using Tapatalk
  15. It's an 86' XLS! Sent from my iPhone using Tapatalk
  16. He seemed to want it gone so hopefully for cheap. But who knows. Sent from my iPhone using Tapatalk
  17. Rust free Comanche in Florida, Needs motor. Sent from my iPhone using Tapatalk
  18. Ha, I just assumed it was something else apparently. But AMC using the same trans on multiple engines does not surprise me at all. Sent from my iPhone using Tapatalk
  19. Hello again! While I'm waiting for my fancy intake and carb for my other, other 86' 2.8 fun, I've been working on installing a 91' 2.5 into an 86' that also originally had 2.5 but it was already gone before I bought it. I'm swapping the harness and all so I'm good there. The issue is the motor mounts will not line up no matter what I do.. I saved the 91' body side mounts off the frame, the drivers side is identical, but the passenger is shorter which is the way the engine needs to go. The motor mount that is supposed to fit that side looks to be close to the same but I don't see how it mounts as there is only one slotted hole and a square hole within an inch and to the side. The 86' mounts are different and they don't look correct either and I assume they won't line up with 91' engine side mounts. I just spent three hours in the garage trying to make it line up but something is definitely wrong. So what the heck am I missing? Sent from my iPhone using Tapatalk
  20. TheDude

    2.8 Carb

    Hello all, I’m looking for either a known good factory carb or ideally the replacement Weber carb for the 2.8. Thanks. Sent from my iPhone using Tapatalk
  21. So if I get the upgrade Edelbrock intake, upper and lower, do you happen to know what Holly fits it? Just because I can get them cheapish, I'd rather go that route if possible. Sent from my iPhone using Tapatalk
  22. It's been a while since I had to ask a question on here but I'm definitely out of my element with my newest Comanche (#5). She's an 86' 2.8 Auto 4WD that I just bought off the original owner. This is the first 2.8 Jeep I've owned and when I know a bit about carbs, I'm more experienced with the Pre-Emissions carbs that don't have 50 lines hooked to them.. So to start I need to either rebuild the carb or replace it to run right and I would like to remove as much unnecessary emissions related parts I can to simplify everything. Should I just rebuild it or upgrade? Someone near me has an Edelbrock intake and upper “Torker”?? Are these worthwhile? All thoughts and options wanted! Thanks in advance! Sent from my iPhone using Tapatalk
  23. I have a pair but shipping may get pricey. Sent from my iPhone using Tapatalk
  24. I have one, PM me. Sent from my iPhone using Tapatalk
  25. It's just dirty from sitting in the basement. But if it's too dirty for you it's alright, I just thought I'd offer. Sent from my iPhone using Tapatalk
×
×
  • Create New...