87manche1

Drop him like a bad habit people like that just walk all over honest people. You will get better clients

So I finally got around to this. Did the sensor ground mod helped a little so I decided to remove the c101 connector and just soldered the wires to corrosponded wires. Runs 10k times better. And steering is back to normal. Next to do tho is valve cover gasket its leaking

Yep

I'd have to re read ur write up this was the thrid time I did it twice with the old and again with the new ended up being.83v

Per ur write up

Yep adjusted. The sensor ground I'm gonna try tomorrow. And a new fuel filter

88 comanche 4.0 auto. New tps, idle control, o2. Intake temp and coolant , map check out ok. Did the c101 connection cleaning and added grounds. I have a 96 head intake and exhaust runs great but the idle is really low around 200rpms I've tried everything I can think of fuel pressure is around 37psi. Just idles to low and because of this steering at no speed is so hard. Any help is appreciated

Had to look it up. I haven't but interesting old military parts

Actually will read slower at 20mph its 1.6 mph off At 65 its 3 mph off not a huge deal. He probably wanted to get new tires but the oems size had fewer choices. So he picked a more popular size. I did the same on the Hyundai had to go slightly bigger to get a better choice.

Use this http://www.tacomaworld.com/forum/tirecalc.php

Sorry 36http://comancheclub.com/topic/17566-360-fuel-injection-build/page-8 This guy

Anythings possible someone has a 318 hooked up with a standalone system

As far as I know u have to have it inspected at a highway patrol station. Make sure u grab vins from any car u take parts from its very important.

doing some squats

I like rock auto good prices fast delivery. Carry allot of good parts

Must be after market ac look how many groves are left on the pulley

Temp sensors are resistant u take away resistance and u have full voltage to the other wire and computer goes nuts trying to keep the engine running.. Sorry been roofing my house the last two days I'm a little tired.

My old 97 had a bad clip on the thermostat sensor. If it came loose it would run like poo and then stall out.

Lol nice. Love the ball pein hammer part

Would love the story on yangtorp

Airspeed those are nice. Once he's insulated 30k will do just fine. Hard to find smaller in a shop hanging unit.

At poor insulation I have 78k btus to heat up the air 40 degrees. So say ur rooms 50degrees heat out put wold be 90 to heat the space. To heat the air up 10 degrees it was 18k btus.

I usually deal with ng that's around what I have. Propane burns hotter.

Closet I could find a tube heater 50k-75k btus was $900 or so

http://m.grainger.com/mobile/details/?R=3E461