72cut Posted September 10, 2024 Share Posted September 10, 2024 88 comanche does this bed look like one that would have come from factory? Link to comment Share on other sites More sharing options...
fiatslug87 Posted September 10, 2024 Share Posted September 10, 2024 I don’t think so, never seen one with those stars before. Link to comment Share on other sites More sharing options...
72cut Posted September 11, 2024 Author Share Posted September 11, 2024 Didn't think so debating on whether to keep it Link to comment Share on other sites More sharing options...
Pete M Posted September 13, 2024 Share Posted September 13, 2024 every liner that fits an MJ is kinda rare at this point. I love mine, but it is definitely a personal decision. best part is the over-the-rail bits that protect the bed from my clumsiness. Link to comment Share on other sites More sharing options...
pizzaman09 Posted September 13, 2024 Share Posted September 13, 2024 I had a nice Comanche specific Pendaliner bed liner. I didn't like how slippery it was and that I had no access to the tie down points in the corners of the bed. I loved how hard it was and how well it protected the bed sheet metal. I ended up getting the bed Linex lined, and love it. Protects the rails and is grippier. Looks amazing. I tried to find someone that wanted the liner for their Comanche but was unsuccessful. Ultimately I sold it to someone that wanted to used it as the floor of their lawnmower shed. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 9/13/2024 at 1:49 PM, pizzaman09 said: I had a nice Comanche specific Pendaliner bed liner. I didn't like how slippery it was and that I had no access to the tie down points in the corners of the bed. I loved how hard it was and how well it protected the bed sheet metal. I ended up getting the bed Linex lined, and love it. Protects the rails and is grippier. Looks amazing. I tried to find someone that wanted the liner for their Comanche but was unsuccessful. Ultimately I sold it to someone that wanted to used it as the floor of their lawnmower shed. Expand Hurts my heart to think someone is using a original Comanche bed liner for a lawnmower shed 💔 Link to comment Share on other sites More sharing options...
pizzaman09 Posted January 29 Share Posted January 29 On 1/29/2025 at 12:55 AM, Montana Offroad said: Hurts my heart to think someone is using a original Comanche bed liner for a lawnmower shed 💔 Expand It did hurt, but I'm glad it didn't end up in a landfill at least. I'm happy when people can recycle. I listed it here for free for months and eventually on Facebook marketplace. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 3:10 AM, pizzaman09 said: It did hurt, but I'm glad it didn't end up in a landfill at least. I'm happy when people can recycle. I listed it here for free for months and eventually on Facebook marketplace. Expand I’m shocked no one took it! Those are very rare these days. Oh well, you tried Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 3:11 AM, Montana Offroad said: I’m shocked no one took it! Those are very rare these days. Oh well, you tried Expand I had a similar situation with mine. Eventually got cut up and thrown away. It wasn't a factory or dealer installed one, it as All Star brand, but still was an MJ one. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 3:24 AM, 89 MJ said: I had a similar situation with mine. Eventually got cut up and thrown away. It wasn't a factory or dealer installed one, it as All Star brand, but still was an MJ one. Expand Shame! I was looking into one until I found out it won’t be compatible with the factory roll bar I’m picking up Friday Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 3:28 AM, Montana Offroad said: Shame! I was looking into one until I found out it won’t be compatible with the factory roll bar I’m picking up Friday Expand This was also 5 or 6 years ago before it was cool to restore these trucks. Or just as these trucks were getting recognition. The roll bar is definitely worth it. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 4:02 AM, 89 MJ said: This was also 5 or 6 years ago before it was cool to restore these trucks. Or just as these trucks were getting recognition. The roll bar is definitely worth it. Expand Thats fair, yeah I am absolutely pumped I found a SWB sport bar 4 hours from me. Paying $500 which sounds about like the going rate? Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 4:17 AM, Montana Offroad said: Thats fair, yeah I am absolutely pumped I found a SWB sport bar 4 hours from me. Paying $500 which sounds about like the going rate? Expand I’d say that is on the lower end of average. By my guess, I’d say the 500-800 range is probably average, depending on condition and location. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 4:27 AM, 89 MJ said: I’d say that is on the lower end of average. By my guess, I’d say the 500-800 range is probably average, depending on condition and location. Expand Sounds like a good score then 😎 haven’t seen it in person so I will report back on the condition. Appeared solid from the photos. 🤞 Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 4:29 AM, Montana Offroad said: Sounds like a good score then 😎 haven’t seen it in person so I will report back on the condition. Appeared solid from the photos. 🤞 Expand Even if it needs some work, it’s not like it would be easy to find another. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 4:31 AM, 89 MJ said: Even if it needs some work, it’s not like it would be easy to find another. Expand That’s 100% true. Took some convincing to get the guy to sell, as he wanted to sell it with the Comanche he has for sale but I sweet talked him. Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 4:34 AM, Montana Offroad said: That’s 100% true. Took some convincing to get the guy to sell, as he wanted to sell it with the Comanche he has for sale but I sweet talked him. Expand Make sure you get the brackets with them. They are under the bed and bolt to the frame. I bought a whole truck to get my roll bar. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 4:56 AM, 89 MJ said: Make sure you get the brackets with them. They are under the bed and bolt to the frame. I bought a whole truck to get my roll bar. Expand 🫡 will do, thanks for the tip. Link to comment Share on other sites More sharing options...
89 MJ Posted January 29 Share Posted January 29 On 1/29/2025 at 4:58 AM, Montana Offroad said: 🫡 will do, thanks for the tip. Expand You’re welcome! Otherwise @krustyballer16 has some in the vendors section. Link to comment Share on other sites More sharing options...
Montana Offroad Posted January 29 Share Posted January 29 On 1/29/2025 at 5:02 AM, 89 MJ said: You’re welcome! Otherwise @krustyballer16 has some in the vendors section. Expand Perfect 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now