eaglescout526 Posted June 5, 2024 Share Posted June 5, 2024 I remember when I found a NOS radio delete plate. I think I sold it to someone on here. Link to comment Share on other sites More sharing options...
Dzimm Posted June 5, 2024 Author Share Posted June 5, 2024 See now you all have me intrigued. I was unaware there ever was a factory radio delete plate in the first place. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted July 26, 2024 Share Posted July 26, 2024 Would it be too much to hope for a double din dash kit, 1997+ console e brake delete, 97+ console to 96- dash filler plate? Looks like you’re getting a nice finish on the dash pieces Link to comment Share on other sites More sharing options...
Dzimm Posted July 26, 2024 Author Share Posted July 26, 2024 4 minutes ago, ghetdjc320 said: Would it be too much to hope for a double din dash kit, 1997+ console e brake delete, 97+ console to 96- dash filler plate? Looks like you’re getting a nice finish on the dash pieces I can add a double din kit to the development list. The others are already in line to be done at some point, hopefully sooner than later. Thanks! Link to comment Share on other sites More sharing options...
ghetdjc320 Posted July 26, 2024 Share Posted July 26, 2024 18 minutes ago, Dzimm said: I can add a double din kit to the development list. The others are already in line to be done at some point, hopefully sooner than later. Thanks! Link to comment Share on other sites More sharing options...
Spinnakerblue89 Posted October 2, 2024 Share Posted October 2, 2024 Screw it! When are you going to 3D Print an entire Comanche truck? Link to comment Share on other sites More sharing options...
Dzimm Posted October 2, 2024 Author Share Posted October 2, 2024 1 hour ago, Spinnakerblue89 said: Screw it! When are you going to 3D Print an entire Comanche truck? I wish I could! I'm always looking to replicate more unavailable parts so let me know if there is anything you come across that needs reproduced. Just needs to be a reasonable size so it fits on the machines. Of course the development list is fairly long and time is limited so it may not be made available for a while but at least can be on my radar. Link to comment Share on other sites More sharing options...
Spinnakerblue89 Posted October 2, 2024 Share Posted October 2, 2024 33 minutes ago, Dzimm said: I wish I could! I'm always looking to replicate more unavailable parts so let me know if there is anything you come across that needs reproduced. Just needs to be a reasonable size so it fits on the machines. Of course the development list is fairly long and time is limited so it may not be made available for a while but at least can be on my radar. I've ordered from you a few times actually. I'm sure there will be more. I just gotta get around to putting a new floor in, and everytime I'm getting there, something else pops up. Link to comment Share on other sites More sharing options...
Dzimm Posted October 2, 2024 Author Share Posted October 2, 2024 Just now, Spinnakerblue89 said: I've ordered from you a few times actually. I'm sure there will be more. I just gotta get around to putting a new floor in, and everytime I'm getting there, something else pops up. I don't think I've seen your name in my inbox before. For any future orders make sure to message me here on CC and buy direct rather than buying on eBay or Etsy so you get the CC discount! Link to comment Share on other sites More sharing options...
Spinnakerblue89 Posted October 2, 2024 Share Posted October 2, 2024 8 minutes ago, Dzimm said: I don't think I've seen your name in my inbox before. For any future orders make sure to message me here on CC and buy direct rather than buying on eBay or Etsy so you get the CC discount! Today I learned! Link to comment Share on other sites More sharing options...
Dzimm Posted April 2 Author Share Posted April 2 Several new products added! Seat tilt lever trims and knobs, washer nozzles that don't break, and a more flexible and beefed up manual shifter boot bezel. Be sure to check them out! There are several more Jeep parts and other products coming very soon so be sure to keep checking back. Link to comment Share on other sites More sharing options...
James92 Posted April 3 Share Posted April 3 Sweet! I'll be ordering a bunch of things soon. Thanks! Link to comment Share on other sites More sharing options...
watchamakalit Posted April 11 Share Posted April 11 WOOOOHOOOOO!!!!!!!!!!!! Exterior mirror delete plates are amazing. Fit and finish is amazing as always. Glad I could have a hand in bringing these to production. I now have several of these printed parts on my truck and must say zimdaks are by far the nicest I have experienced. Link to comment Share on other sites More sharing options...
Dzimm Posted April 11 Author Share Posted April 11 13 minutes ago, watchamakalit said: WOOOOHOOOOO!!!!!!!!!!!! Exterior mirror delete plates are amazing. Fit and finish is amazing as always. Glad I could have a hand in bringing these to production. I now have several of these printed parts on my truck and must say zimdaks are by far the nicest I have experienced. Thank you again for lending a set to reference and for sharing! Happy to hear you're happy with the parts. Link to comment Share on other sites More sharing options...
fiatslug87 Posted April 11 Share Posted April 11 Anyone interested in the antenna delete plug? If there’s interest I can send to @Dzimm to model, #11 in the diagram. Link to comment Share on other sites More sharing options...
Dzimm Posted April 11 Author Share Posted April 11 13 minutes ago, fiatslug87 said: Anyone interested in the antenna delete plug? If there’s interest I can send to @Dzimm to model, #11 in the diagram. I probably could get away with just a couple pictures for that. I could just take the antenna off my XJ and make a plug based off the mount. I started work on a replacement antenna mount a couple years ago but never finished it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now