Dzimm Posted March 26, 2022 Share Posted March 26, 2022 Does anyone know of a source for the clips that go on the tail lights the screws go into? I've got a product nearing the end of development and I have been trying to source these clips for it but none I've found are the right size. An exact match would be ideal but anything that's close will work as well. Link to comment Share on other sites More sharing options...
89 MJ Posted March 26, 2022 Share Posted March 26, 2022 Have you checked out AuVeCo? They make a bunch of clips. A local body shop supply company should stock some. Link to comment Share on other sites More sharing options...
JMO413 Posted March 26, 2022 Share Posted March 26, 2022 Exact match from GM. https://www.fastener.zone/products/auveco-9880-347-gm-15650655 These are the Aveco equivalent. Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 26, 2022 Share Posted March 26, 2022 15 minutes ago, JMO413 said: Exact match from GM. https://www.fastener.zone/products/auveco-9880-347-gm-15650655 These are the Aveco equivalent. I need a massive list of GM hardware that is the same for a bunch of our stuff so I can put each AMC/Chrysler number and link it to the GM stuff. Link to comment Share on other sites More sharing options...
Dzimm Posted March 26, 2022 Author Share Posted March 26, 2022 19 minutes ago, JMO413 said: Exact match from GM. https://www.fastener.zone/products/auveco-9880-347-gm-15650655 These are the Aveco equivalent. Awesome, thank you!! They are cheap too which is great! Link to comment Share on other sites More sharing options...
JMO413 Posted March 26, 2022 Share Posted March 26, 2022 If I'm right on what it is how do I get a set? I already have lens Link to comment Share on other sites More sharing options...
Dzimm Posted March 26, 2022 Author Share Posted March 26, 2022 10 minutes ago, saveevryjp1998 said: 👀 bet I know what it will be. Link to comment Share on other sites More sharing options...
Dzimm Posted March 26, 2022 Author Share Posted March 26, 2022 Just now, JMO413 said: If I'm right on what it is how do I get a set? I already have lens More info to come later. Can't give away all my secrets! Link to comment Share on other sites More sharing options...
Limeyjeeper Posted March 30, 2022 Share Posted March 30, 2022 I hope this is what I think it is, because if it is what I think it is that would be awesome!!😁 Link to comment Share on other sites More sharing options...
89 MJ Posted March 31, 2022 Share Posted March 31, 2022 If it is what I think we all hope it is, this is going to be a game changer! Link to comment Share on other sites More sharing options...
Parei_doll_ia Posted March 31, 2022 Share Posted March 31, 2022 You could also just extrude a boss for an m4 screw or similar and tap it post printing. Then you wouldn't need the clips. Of course this would require that the end user not over torque the screws Link to comment Share on other sites More sharing options...
Dzimm Posted March 31, 2022 Author Share Posted March 31, 2022 8 minutes ago, keeponjeepinon said: Of course this would require that the end user not over torque the screws That's the key, plastic threads suck. On the JK adapters I print threaded bosses for the screw I include and they work well but again plastic threads and they add a considerable amount of print time for the boss and the support.. I will probably be changing the JK adapters to use these clips instead. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now