eaglescout526 Posted September 29, 2023 Share Posted September 29, 2023 On 9/29/2023 at 1:00 AM, fiatslug87 said: Unfortunately, they are not currently being reproduced. However, I remember someone saying they were sending a NOS one to Phoenix Graphics (???) for reproduction. Expand I haven’t heard anything since I last spoke to the gentleman about getting them done. OP, you can call Phoenix graphics and see if they have them yet. Or I can tomorrow. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted September 29, 2023 Author Share Posted September 29, 2023 On 9/29/2023 at 1:13 AM, eaglescout526 said: I haven’t heard anything since I last spoke to the gentleman about getting them done. OP, you can call Phoenix graphics and see if they have them yet. Or I can tomorrow. Expand I will give Phoenix Graphics a shout tomorrow and see what the word is. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted September 29, 2023 Author Share Posted September 29, 2023 I spoke with Nathan at Phoenix Graphix this morning. He was not aware of any effort being made to bring the '91 and '92 "Pioneer" decals to production. I mentioned Comanche Club to him but he was unaware of any NOS decals being sent to Phoenix Graphixs. Link to comment Share on other sites More sharing options...
eaglescout526 Posted September 29, 2023 Share Posted September 29, 2023 Hmmm. I’ll see what I can do. I think I still have the emails from the guy who was gonna get it done. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted October 3, 2023 Author Share Posted October 3, 2023 On 9/29/2023 at 5:37 PM, eaglescout526 said: Hmmm. I’ll see what I can do. I think I still have the emails from the guy who was gonna get it done. Expand Sounds good, hopefully it is still on their radar. On another note, anyone see any reason why this hood wouldn't be a direct bolt on replacement for my 92 Comanche? Summit tells me it is incompatible. Link to comment Share on other sites More sharing options...
Pete M Posted October 3, 2023 Share Posted October 3, 2023 pretty sure all hoods are the same for XJ/MJ 87+ . based on the poor reviews of aftermarket fenders though, I'd probably try the junkyards first before buying an aftermarket hood. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted October 3, 2023 Author Share Posted October 3, 2023 Thanks Pete. A hood from any year model XJ should be a direct fit for any year model MJ right? Link to comment Share on other sites More sharing options...
eaglescout526 Posted October 3, 2023 Share Posted October 3, 2023 On 10/3/2023 at 1:53 PM, Jlindsey86 said: Thanks Pete. A hood from any year model XJ should be a direct fit for any year model MJ right? Expand You’ll want 87-96. 84-86 are different in terms of how it latches closed. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted October 3, 2023 Author Share Posted October 3, 2023 On 2/6/2022 at 9:03 PM, 88mjsally said: No sorry, I broke every one I tried to pull out Expand On 6/5/2023 at 4:06 PM, Salvagedcircuit said: What did you use to paint the wheels? I ended up spraying my turbine wheels with Rust-Oleum 248929 High Performance clear Wheel Spray Paint. I think I'm going to regret that in a few weeks as I have a feeling the clear coat is not going to hold up to even road sand. Expand On 10/3/2023 at 2:56 PM, eaglescout526 said: You’ll want 87-96. 84-86 are different in terms of how it latches closed. Expand Copy, I assume 97-01 XJ hoods are incompatible as well? Link to comment Share on other sites More sharing options...
89 MJ Posted October 3, 2023 Share Posted October 3, 2023 On 10/3/2023 at 9:35 PM, Jlindsey86 said: Copy, I assume 97-01 XJ hoods are incompatible as well? Expand 97-01 hoods will work. Why do you need a hood? Link to comment Share on other sites More sharing options...
Jlindsey86 Posted October 3, 2023 Author Share Posted October 3, 2023 On 10/3/2023 at 9:50 PM, 89 MJ said: 97-01 hoods will work. Why do you need a hood? Expand My hood has so many dents in it from sitting under a pecan tree for years that I have consistently been quoted $1000 to have them removed via PDR. On top of that it has cracked and peeling paint. My thought is that it would make sense to purchase a different hood that needs far less work, swap it onto the truck and then have it painted and blended into the quarter panels. Link to comment Share on other sites More sharing options...
89 MJ Posted October 3, 2023 Share Posted October 3, 2023 On 10/3/2023 at 11:35 PM, Jlindsey86 said: My hood has so many dents in it from sitting under a pecan tree for years that I have consistently been quoted $1000 to have them removed via PDR. On top of that it has cracked and peeling paint. My thought is that it would make sense to purchase a different hood that needs far less work, swap it onto the truck and then have it painted and blended into the quarter panels. Expand That makes enough sense to me! Link to comment Share on other sites More sharing options...
fiatslug87 Posted October 9, 2023 Share Posted October 9, 2023 @eaglescout526 any luck with the Phoenix Graphics people and the 91-92 Pioneer decals? Link to comment Share on other sites More sharing options...
eaglescout526 Posted October 9, 2023 Share Posted October 9, 2023 Shoot! I’ll reach out today. Link to comment Share on other sites More sharing options...
eaglescout526 Posted October 9, 2023 Share Posted October 9, 2023 On 10/9/2023 at 4:27 PM, saveevryjp1998 said: By chance could you also ask what he'd need to reproduce the 88 Olympic Pioneer graphics? Expand Oh easy. They need original graphics, either new, repro or a vehicle that still has them. Link to comment Share on other sites More sharing options...
eaglescout526 Posted October 9, 2023 Share Posted October 9, 2023 In front of them works the best but I’m sure if you got them measurements they would be able to reproduce the graphics. Link to comment Share on other sites More sharing options...
Jlindsey86 Posted October 13, 2023 Author Share Posted October 13, 2023 Finally got around to having my control arms swapped out with some new ones. It's amazing just how much more feeling I have of the front end now. This was long overdue, they are called control arms for a good reason! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now