m2bandit Posted August 5, 2021 Share Posted August 5, 2021 These tail lights would be made of ABS plastic and use standard 6" oval truck lights. Below is a rendering of the right side. Oval lights can be found in stop/turn/tail/backup as shown below or stop/turn/tail for the sides. Link to comment Share on other sites More sharing options...
jeeptec1 Posted August 5, 2021 Share Posted August 5, 2021 Kinda cool. I think it would be great on a truck that does some hard wheeling. I’ve broken a taillight or 2 and good used replacements are extremely difficult to get. Also you could remove and put away the factory ones and use these. Yea I’m interested Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
tugboat95 Posted August 5, 2021 Share Posted August 5, 2021 It would nice to have an option. I like the off-road idea. Shouldn't effect the values of the originals since it looks like I may be funding my retirement with them. I'm up to 3 pairs now. Just waiting the break the originals on the truck.Joke aside it would be nice to have new lights.89 ComancheEliminator2wd4.0L5 speed PukeGoatFactory Original Link to comment Share on other sites More sharing options...
gvthnks Posted August 5, 2021 Share Posted August 5, 2021 that may be a great option. Link to comment Share on other sites More sharing options...
Jeep Driver Posted August 5, 2021 Share Posted August 5, 2021 If you are going to bother........ Why not be creative? Also, are you going to match the multiple radii? If not it will look cheap and you'll be unsuccessful. Link to comment Share on other sites More sharing options...
m2bandit Posted August 5, 2021 Author Share Posted August 5, 2021 58 minutes ago, Jeep Driver said: If you are going to bother........ Why not be creative? 58 minutes ago, Jeep Driver said: Also, are you going to match the multiple radii? If not it will look cheap and you'll be unsuccessful. Working on it. Link to comment Share on other sites More sharing options...
Jeep Driver Posted August 5, 2021 Share Posted August 5, 2021 3 minutes ago, m2bandit said: Working on it. There is no area on a proper filler panel that would be flat.......it's entirely round. A flush mount light will not work. Link to comment Share on other sites More sharing options...
howeitsdone Posted August 5, 2021 Share Posted August 5, 2021 Why not make tail light guards? Wouldn't be super different from the rendering already. Just bars instead of flat metal. People are always keeping the original lights. There is no form of protection currently, unless you put your truck on a shelf and leave it there. And even then! Link to comment Share on other sites More sharing options...
ghetdjc320 Posted August 6, 2021 Share Posted August 6, 2021 3 hours ago, Jeep Driver said: There is no area on a proper filler panel that would be flat.......it's entirely round. A flush mount light will not work. There are many compound curves on the tail corners that need to be matched to look right. Link to comment Share on other sites More sharing options...
Andy in Pa Posted August 6, 2021 Share Posted August 6, 2021 I like this idea, I would run a set for sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now