cruiser54 Posted February 6, 2021 Posted February 6, 2021 I have a handful of these IATs/MATs that I've salvaged over the years. They are no longer available new. $35 each shipped in the continental United States. I will combine shipping if you buy other sensors/senders.
Big Dan Posted February 6, 2021 Posted February 6, 2021 I'm in for one. Please PM me your payment info. Sent from my Pixel 4 XL using Tapatalk
cruiser54 Posted April 7, 2021 Author Posted April 7, 2021 Don't miss your chance to get these sensors. I won't have them forever.
54bobby Posted April 8, 2021 Posted April 8, 2021 2 questions, #1, is this the sensor located in the intake manifold known as the MAT sensor. #2, will it work in my 87 2.5? i know my MAT is nla, and i also know that there was different ones with different input/output values so just any one won't work.
cruiser54 Posted April 8, 2021 Author Posted April 8, 2021 Also known as MAT sensor. Unavailable new. I don't know if they're the same for a 4 cylinder or if they even had one. Nothing shows up online when researched.
knever3 Posted April 15, 2021 Posted April 15, 2021 Off topic to some extent, my 4.7L stroker has always had a up and down idle and seems worse when cold. Would this be a possible place to look? I haven't looked into the problem, I have just dealt with it. I have a Snap On scanner and a multimeter, just haven't had the time to allocate to it. I will buy one if I know how to test mine, it's an '87 by the way, but it has most parts from a '90. Actually these Jeeps are all random parts, mine isn't any different.
cruiser54 Posted April 15, 2021 Author Posted April 15, 2021 The MT2500 will read the IAT in F degrees. It's an 87? Still have the C101 connector?
buxmj Posted April 17, 2021 Posted April 17, 2021 I am interested in getting one, thanks! Just pm me your payment info and I will get you the $. Buck.
cruiser54 Posted July 5, 2021 Author Posted July 5, 2021 Some left.... Here's something to help with diagnosis.
cruiser54 Posted September 30, 2021 Author Posted September 30, 2021 Just bringing this to the top since there has been a lot of IAT questions on the forum lately.
cruiser54 Posted October 13, 2021 Author Posted October 13, 2021 2 CTSs left and 2 IATs for Renix. I have a bunch of HO sensors also. I'll need to figure out exactly what they are first.
Rubikahn Posted December 27, 2021 Posted December 27, 2021 I’ll take the two remaining IATs if you still have them? Please send me a PM with payment details, ty.
cruiser54 Posted December 29, 2021 Author Posted December 29, 2021 I'll have to go look. I've had the flu.
Rubikahn Posted December 30, 2021 Posted December 30, 2021 4 hours ago, cruiser54 said: I'll have to go look. I've had the flu. 👍 Damn that sucks, get well!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.