Jump to content

Recommended Posts

Posted

1987 Jeep Comanche

 

2.5L 4cyl / AX4 4spd / 2wd / 3.55 / 113in

 

Build Date: 5/28/1987

 

Current Location: North Carolina, Charlotte Region

 

Status: 176k miles and counting. Registered and driven regularly. 

 

Notes: Base level trim and options, no passenger door mirror, manual steering, no AC. Paint code BE (Colorado Red), no side graphics. Tan interior, cloth bench seat, rubber floor mat, aftermarket sliding rear window. Dealer installed Jeep AM/FM radio with tape deck and door speakers.  Aftermarket steel rear bumper with an Oregon AMC/Jeep dealer's name and location stamped into it. 

 

 

 

IMG_4924.JPG

Posted
5 minutes ago, rtferguson_39 said:

 Aftermarket steel rear bumper with an Oregon AMC/Jeep dealer's name and location stamped into it.

I'm going to need to see a picture of that.

Posted

Welcome to the Forum. Lots of good people LOG IN here. Update your SIGNATURE.

 

LOG-IN. Upper right hand of screen. Click on Username. Click on Account Settings. Find and click on Signature. Add vehicle information here (YR, ENG, TRANS, etc, etc) and save. This helps everyone. This information will be available every time you post.

Posted
2 minutes ago, Ωhm said:

Welcome to the Forum. Lots of good people LOG IN here. Update your SIGNATURE.

 

LOG-IN. Upper right hand of screen. Click on Username. Click on Account Settings. Find and click on Signature. Add vehicle information here (YR, ENG, TRANS, etc, etc) and save. This helps everyone. This information will be available every time you post.

 - I have logged in and updated my signature. Hope its showing up properly. Thanks!

Posted
2 minutes ago, rtferguson_39 said:

- I have logged in and updated my signature. Hope its showing up properly. Thanks!

Reading it Loud and Clear. :L:

Posted

build date: 06/24/87

body MJTL61

*X1-DESCRIPTION NOT AVAILABLE

-YY-DESCRIPTION NOT AVAILABLE

APA-Monotone Paint

CBA-Straight Back Bench Seat

CGX-RR Head Restraints Outboard Seating

DCB-Open

EPD-DESCRIPTION NOT AVAILABLE

GAC-Tinted Glass Windows

HCC-Do Not Use - See HCA

JJA-Cigar Lighter

LAP-Shift Indicator Warning Lamp

LMA-Halogen Headlamps

MDA-Front License Plate Bracket

NAA-Federal Emissions

PE4-Colorado Red

QE4-Colorado Red

TBG-Compact Spare Tire

WMC-Open

3LR-DESCRIPTION NOT AVAILABLE 

Posted
2 hours ago, Pete M said:

what a gorgeous survivor!  :drool:   be sure to start a build thread and share all the details!  :L: 

Thank you. I've searched for a couple years to find a clean example like this (for a set price). 

Since I acquired this truck I've: 

-Fixed a charging system issue (damn instrument cluster fuse...)

-Restored the badly broken headliner board and recovered said headliner

-Restored/repainted the Comanche badges, driver side mirror housing, cowl panel (small details)

Future plans:

-Repaint the roof (all paint is basically non-existent up there)

-Durabak bed liner in red

-4wd, AX5, 231 swap

      - I'm on the fence about this one...I've got XJ's for the trails already (this MJ is just so nice). But a wrecked '90 XJ with the proper ratio front axle  in my           backyard...so the thought is in my head. 

-Dummy light inst. cluster removal, swap to a proper cluster with actual gauges, sending units of course with that. 

Posted
40 minutes ago, jdog said:

build date: 06/24/87

body MJTL61

*X1-DESCRIPTION NOT AVAILABLE

-YY-DESCRIPTION NOT AVAILABLE

APA-Monotone Paint

CBA-Straight Back Bench Seat

CGX-RR Head Restraints Outboard Seating

DCB-Open

EPD-DESCRIPTION NOT AVAILABLE

GAC-Tinted Glass Windows

HCC-Do Not Use - See HCA

JJA-Cigar Lighter

LAP-Shift Indicator Warning Lamp

LMA-Halogen Headlamps

MDA-Front License Plate Bracket

NAA-Federal Emissions

PE4-Colorado Red

QE4-Colorado Red

TBG-Compact Spare Tire

WMC-Open

3LR-DESCRIPTION NOT AVAILABLE 

Seriously appreciate the info. Things I don't know: how are you able to obtain the build options just from the VIN? 

Posted
16 minutes ago, rtferguson_39 said:

Seriously appreciate the info. Things I don't know: how are you able to obtain the build options just from the VIN? 

They work in dealerships. 

Posted
24 minutes ago, rtferguson_39 said:

Seriously appreciate the info. Things I don't know: how are you able to obtain the build options just from the VIN? 

no problem

  • 2 weeks later...
Posted
On 5/13/2020 at 11:01 AM, 89 MJ said:

I'm going to need to see a picture of that.

In regards to my aftermarket steel bumper that is stamped with the dealer name and location, I finally scraped all the bumper stickers off...and... Don Carlton Jeep, Gladstone Oregon. Research time...

4F249289-03ED-49C3-99F3-C7642A33FD75.jpeg

6F4AFC9B-E652-4921-B272-9CA1B46512E3.jpeg

01B98347-7551-4F78-8E85-DEFFB71A23A0.jpeg

  • 8 months later...
Posted
On 1/29/2021 at 9:57 PM, jdog said:

Selling Dealer: Don Carlton Jeep-Eagle

Gladstone, OR

Yup. From a recent satellite search, the building is still in Gladstone, but it is now a marine powersports dealer/service shop. I found an old invoice for DCJE dating to 1992 for promotional signs being ordered, but the paper trail seems to stop after that. I'm thinking they closed down sometime shortly after 1992. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...