yellaheep Posted June 23, 2019 Share Posted June 23, 2019 So, this is the last of my MJ stash. I'm willing to ship any of these items. I'm thinking it'd be more efficient to discuss price based upon what you want, the more you want, the better the price. PM with questions. Paypal accepted. Stroh's pin SOLD. Eliminator pin, MJ pin SOLD and Cherokee pin. Misc. MJ ads and Archer Brothers images, and one magazine with a lengthy, multi-page feature on the MJ. Early and late model XJ/MJ window cranks and 1 pair of late model XJ dash vents. (2 sets of tan late XJ cranks are actually 2 different colors, the one pair on the right are from a '00-'01 XJ) Left to right - 2 pairs tailgate straps, early have the rib in the strap, later version below with black overspray - 2 hood release cables - R&L Chrome trim for Laredo interior for hockey stick arm rests - R&L interior door handle releases/locks in black - 2 drivers side in chrome - 4 "good" MJ B-pillar lights, 3 move, one is loose (brass detent needs bent back into place) SOLD - Pair of rear MJ bump stops - Fog light switch panel SOLD- Late model SOLD and early model cup holder - brake releases, one no cable fray, SOLD 3 with minor cable fray - Assortment of tailgate parts, 4 round rubber bumpers. Wedges all SOLD 3 sets of plastic splash panels for MJ bed wheel wells - 2 gray sets of seat belt receivers (can be used for bench, or bucket if you have the sleeves) - One center seat belt for bench - assorted emblems from Cherokee, 4.0 Liter emblem SOLD , not sure if the 4x4 emblems are same for rear of MJ cab - MJ rear bumper plastic pads for step and license plate light area, 4 right, 4 left, 3 right top, 2 left top - Set of license plate lights for MJ rear bumper SOLD - pair of bumper hole caps for MJ bumper (go on each side of center ball hitch hole) - B pillar cab vents - Center console e-brake delete panel filler (need to remove and put into an XJ console part)- Lower control arm alignment shims - Gray arm rest. Front bumper license plate bracket - 3 gray dash ash trays - Blue and gray sun visor clips sets and pieces ALL SOLD - Numerous late model XJ right kick panel fuse doors in agate, gray and tan - Several MJ bench seat hinge covers in light and dark gray - One seat belt sleeve for bucket seat or shoulder belt SOLD - Pair of MJ rear speaker mount brackets - 2 B-pillar lights, no wiring SOLD - Pair of bench seat seat belt hole trim - Pairs of late model tweeter speakers (fit where rear view mirror cover panel goes on the door) SOLD - Metric Ton tail gate emblem SOLD - 2 MJ jack mount brackets (one with wing stud, one without), one bracket & wing stud, strap, one styrofoam isolator. SOLD 2 Left side MJ shoulder belt assemblies in gray - 2 plastic dust shields for behind the assemblies - 2 right side shoulder belt assemblies, one gray, and thefar right one is the dark blue interior color - one '92 Drivers side MJ shoulder belt assembly which is different than earlier models, but I don't know if it's '92 only or if it fits '91 or when the change happened...? Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted June 23, 2019 Share Posted June 23, 2019 Pm sent Link to comment Share on other sites More sharing options...
Blaine.D Posted June 23, 2019 Share Posted June 23, 2019 Pm sent Link to comment Share on other sites More sharing options...
yellaheep Posted June 23, 2019 Author Share Posted June 23, 2019 To keep it simple..... If you're interested in any of this, please PM. Too hard to tell who responded first having to go between this thread and PM's. Thanks! Link to comment Share on other sites More sharing options...
Gatorgirl Posted June 23, 2019 Share Posted June 23, 2019 PM sent Link to comment Share on other sites More sharing options...
Nashmanche Posted June 23, 2019 Share Posted June 23, 2019 Do you still have a complete set of bench seat belt receivers? I also need a center seat belt set up for a bench. Gray in color. Thanks. Sorry, just saw your message to pm. So done. Link to comment Share on other sites More sharing options...
500 MJ Posted June 24, 2019 Share Posted June 24, 2019 Sending PM regarding 4.0 Liter and Metric Ton badges, all visor clips and rear bumper liscence plate lights harness. Link to comment Share on other sites More sharing options...
JMO413 Posted July 2, 2019 Share Posted July 2, 2019 Parts received. Thank you! Link to comment Share on other sites More sharing options...
JH4020 Posted July 2, 2019 Share Posted July 2, 2019 HOW MUCH FOR A BUMPER TOP PAD FOR PASSENGER SIDE? Link to comment Share on other sites More sharing options...
yellaheep Posted July 18, 2019 Author Share Posted July 18, 2019 BUMP...... Don't let this stuff get tossed! Link to comment Share on other sites More sharing options...
500 MJ Posted July 18, 2019 Share Posted July 18, 2019 9 hours ago, yellaheep said: BUMP...... Don't let this stuff get tossed! ... before that happens you and I will be cutting a deal for everything that is left! :) Link to comment Share on other sites More sharing options...
yellaheep Posted July 19, 2019 Author Share Posted July 19, 2019 14 hours ago, 500 MJ said: ... before that happens you and I will be cutting a deal for everything that is left! :) Hit me up Brent. I can pile it all up into 1 or 2 storage boxes and send it FedEx. Link to comment Share on other sites More sharing options...
Nashmanche Posted July 19, 2019 Share Posted July 19, 2019 PM sent. Link to comment Share on other sites More sharing options...
Top C Posted August 17, 2019 Share Posted August 17, 2019 How much for the tailgate straps? Mike Link to comment Share on other sites More sharing options...
neohic Posted August 18, 2019 Share Posted August 18, 2019 PM sent on the print ads. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.