89 MJ

Awesome, thank you!

That was kinda my thinking. I think I will watch it for a while and if he drops his price closer to $2,000, I may contact him about it.

I know that the Peugeot and the AX-15 have different numbers of splines on the output shaft where it goes into the transfer case. When did the AW4 switch to the same number of splines as the AX-15? I am trying to figure out if I should save the 96 231 that came behind my AW4 for my 97 AX-15. Thanks

I do not think he's a member. Neohic did post this MJ before though.

Update. The vavles were a little sticky and the valve kissed the piston. So, two pushrods got slightly bent. I'll post a picture later.

https://rmn.craigslist.org/pts/d/spring-valley-87-jeep-comanche-metric/7224926556.html Well, I found this one relatively close to me (about 90 minutes away), but I really can't tell if its a good deal or not. This truck is a Metric Ton, which I want, and it isn't rusty (according to the ad, I'm sure the floors say otherwise). I know I got a good deal on my blue MJ at $1,500, but does anyone know if this seems like a good deal? It does seem like a lot for a running truck, but if it isn't rusty it may be close to being worth it.

AAAAAAAAAARRRRRRRRRRGGGGGGGGHHHHHHHHHH!!! I've gone a week without driving this thing and I miss it already. This is going to be a long winter.

November 2020 MJOTM-Fryedaddy's 88 Bucket List Build Thread- https://comancheclub.com/topic/57268-bucket-list/#comments Year/Model – 1988 Comanche (Bucket List) Drivetrain- Factory Renix 4.0 with a bored throttle body, AW4 and transfercase 180k miles (All have been serviced), 1987 Grand Wagoneer Dana 44 & Ford 8.8 and ARB lockers front and rear with Yukon 4.88 gears. Cooling- Alloyworks 3 row aluminum radiator, factory fan, fan shroud, electric fan & converted to open cooling. I am impressed by how the aluminum radiator cools the engine. Electrical/Ignition- Stock wiring harness, complete Cruiser 54 tip run through/maintenance, Mean Lemons battery cable and ground wires. Suspension/Steering- Barnes 4wd High steer arms, one-ton steering & truss for the Grand Wagoneer Dana 44, Clayton 3-link long arm kit for the front axle, Core 4x4 adjustable trackbar and bracket, JKS ACOS 2” Spacers, Rusty’s 6.5” springs (8.5” lift total), SOA rear axle with a Barnes 4wd swap kit and truss. Procomp shocks all around. Front and rear driveshafts have been lengthened by Oliver’s driveshaft. Interior- Completely gutted except the dash, bench seat and shifter cover. Mat66 sound/heat deadener installed throughout. Round push button switches for lockers & lights. Brakes- New Factory calipers and brake pads front and rear. 1995/96 XJ power booster and a Dodge 2500 master cylinder to apply additional pressure to the front and rear disk brakes. Lighting- Rigid LED headlights, Baja Design amber foglights, Rusty’s rear brake light pods with oval LED lights, KC amber reverse lights, Rigid lights mounted on the tent rack faced rearward. LED lighting installed in the interior. Exterior- Color: Krylon Fusion – Matte Ink Blue 2000 Jeep Cherokee grill and fender conversion JCR front and rear bumpers with Smittybilt Winch Dirtbound Offroad protection panels on the front fenders and bed. Dirtbound Offroad rock sliders Wheel & Tires- Micky Thompson Side Biter II – 15x10” wheels and 35”x12” Baja Claw tires. Hopefully, I’ll install a set of 37” tires soon. Misc- DIY Cowl intake based on a Renix Specter intake. ARB onboard air with aux tank. Cutdown a Tacoma Beast mid height bedrack Smittybilt RTT Highlift jack Best MJ story- So far this truck has been in pieces for 80% of the time I’ve owned it. Originally, I was looking for an MJ with intentions of building and driving out to Moab. I’m a year late but learned a lot while building the rig. I’ve taken it to Windrock park, TN and Cape Lookout, NC so far. Everywhere I go, people walk up to me and complement me on it. CC is Awesome! Why? During my build, several people offered advice and I’m thankful. Everyone on CC has been helpful and I’ve never seen anyone flame another for their decisions. You can click on a link to the most heavily built rock crawler to bada$$ street comanche with an LS. The addiction is real! Congratulations @Fryedaddy!!

Pretty pictures taken around the property today. The left rear was off of the ground here. The front sway bar was not disconnected.

Those are cool!

I would get the rear bumper straightened if I were you. You could sell it then and make money off of it.

Glad to hear it

Yeah, you are!! I left it up to your imagination.

Do you want to trade a 13 year old brother for this Jeep by chance?

I’ll just let you use your imagination. No issues here hahahah

I hope he does. An MJ without decals is like a woman without, well, you know.

We had mine apart a little bit.

Added, thanks

https://www.tntcustoms.com/jeep_parts/jeep_cherokee_xj_bumper_adventure_series

That is pretty sweet!

I’ve got my 96 motor ready to drop in!

Looks like a nice rig at a fair price.

He bought the truck this way. It was probably custom though.

That’s a good point there.