eaglescout526

Did you lube the snake for the regulator? Also I have been reading this for a while. Well done. I feel your pain on all the wiring behind the D-side kick panel. These just so much going on over there you could easily get lost in that mess.

Man, it kills me to not be doing this. Thank you jdog! Do we expect to see a build thread sometime soon?

Yeahhhhh I have never seen an American Renault in my life and probably never will. When the U.S. did cash for clunkers, people probably got rid of them as soon as they could. Much like how we can't find many Renix era Jeeps any more.

Damn. Still wish I had my original Renix coil.

None of us Renix guys have probably never ever seen anything plugged in there. We do know(Those who know who they are) that if you plug in the underhood light power plug, the entire system will turn on but not crank or start but would keep everything running when you turn off the truck.

No....sadly I can not get up there due to this damn virus so I can't even attend to the XJ until this thing blows over. I sent a new glass up there already and is at my girlfriends house ready to be installed.

I need a set of these. Wouldve never thought to 3d print those. Nonetheless great work!

Not Nutmeg sadly. It is very very tempting though.

Hella has a wiring kit included with their lights. All you’ll need to do is just wire in the factory switch at the headlight harness.

Jdog is right. I planned on snagging one of those keyless entry pieces to put a little module in for future keyless entry.

Well, I have officially lost access to the catalog and can no longer run VINs and get parts. I can how ever look up parts with my hard copy catalogs and provide part numbers. If anything changes such as getting my job back, I will post it here.

I found something to do. Besides pressure washing my bench seat(still need to do that) I remembered I broke two bolts when replacing the rear bumper bracket. Now I shall go remove those and hope for the best. Perfect too because if I remove the bumper I can install a NOS bumper delete license plate light and still run her around if I need to.

@JMO413 I feel bad because you did a DIY on this but I found this kit sitting at a dealer in IL. Trailer wiring kit for all AMC models with red tail lamps. So our trucks, Encores and Wagoneers. Really neat find.

Youre right, they do charge a fee if you do the business payment.

They do this if you have your card directly linked and they charge a fee. Kinda like taking money out of your account from a non home bank ATM. I strongly recommend linking your actual bank account with them as there are no deposit or transfer fees but the process takes a day which is better because you get the full amount and not 98% of it.

Everyones guess is as good as mine. If someone has an intact AMC build sheet with that code, I would be delighted to know.

*X8 SEATS - CLOTH LOW-BACK BUCKET -Y1 APA MONOTONE PAINT PACKAGE CAC BUCKET SEAT - LO BK CGW Air Bags - Front, Next Generation** CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ CUF FULL LENGTH FRONT CONSOLE DDJ 5SPD MANUAL TRANS A881 (JA-41) ERB ENGINE - 4.0L I6 MPI GAS GAC ALL WINDOWS - TINTED GLASS GTZ MIRRORS - MANUAL REMOTE HCC HEATER W/UPR LEVEL VENTIL - TYPE II JAY Instrument Cluster w/Tach JFH TACHOMETER - MECH JGB Clock - Digital KD8 STRIPE/BADGE/MOLDING/DELETE LAP FUEL ECONOMY SHIFT INDICATOR LIGHT LMA HALOGEN HEADLAMPS MDA FRT LICENSE PLATE ATTACH REQUIRED NAE EMISS CONTROL TESTING &&&&&&&& LABEL NMB ENGINE COOLING - STANDARD DUTY PE4 Colorado Red QE4 Colorado Red SBA POWER STEERING SCG LEATHER STRG WHEEL - EURO/SPORT TYPE TBG SPARE TIRE - COMPACT TBL TIRE CARRIER - INSIDE WMC BASE WHEEL DRESS - UP (INCLS TRIM RING) Build date 11/21/86 Body code TL61

Awesome, I am glad y'all enjoyed it! I think I'm gonna make some this weekend now that I'm craving it.

Well if we can't go out and work on our MJ's or go to work. Why not try others home recipes. Like others my mom came up with this one.

Using thighs or breasts? Gotta let me know how it comes out and be prepared for some smoke. Don’t be afraid to have them cook slowly.

Might edit your post to say that Done

Highest my range goes it is "HI" or 9. So if yours is a 1-5 then a good middle level on the dial will suffice. Grew up with a range that was low-High and always thought all others were like that.

No problem. I should clarify don't fill the pan entirely with oil, just enough to where it covers half of the chicken. Corn flakes huh? Different. My girl said she maid Cheez It chicken once, doesn't sound appetizing but she swears it is good.

Quite simple for a delicious meal but tough to make. You need chicken thighs(preferably but breasts will suffice)as they are easier to cook and work with. about four eggs and frosted flakes Grounded up to almost powder like but still want some chunks and if you want to you can add some powder sugar or spices to make the chicken sweeter or spicy. First fill a good size pan with some vegetable oil and warm up using a mid level setting on the stove Put the frosted flakes in a big Ziploc bag Ground the frosted flakes up using a rolling pin then put flakes into a container big enough to hold the flakes and chicken that won't spill over with mixing movement. Cut up you chicken thighs into either strips or nuggets of your choice. Crack your eggs into a bowl and stir them up until blended Put chicken into eggs(ironic) Then take the chicken that is in the egg and do one piece at a time and bread them with the frosted flakes.(To be less messy if cooking them by yourself, use one hand to bread the chicken and use tongs while the other grabs the chicken out of the yolk and puts it into the frosted flake) Be careful not let any yolk get into the flakes as they will be soft and harder to get to adhere to the chicken Then your oil should be warm enough to put your chicken in and cook. Watch for oil splashes! Make sure your chicken isn't pink on the inside and they are golden to your liking and enjoy! I think that's everything. If I forget something I will add it but I make these enough to where I got it down to a science. Also it helps to clear the pan of the old flakes and produces less smoke. Make sure the kitchen is well ventilated.

Frosted Flake Chicken.