Jump to content

A-man930

Members
 View Profile  See their activity

  • Posts

    1476

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by A-man930

  1. A-man930
    You rock. Thank you!
  2. A-man930
    Once again, my slow pace takes its toll... Where did the factory put seam sealer in the engine bay, exterior, and interior? I'm 75% confident in what "makes sense" when looking over everything, but I'm not interested in missing some weird path for water to find its way in.
  3. A-man930
    Lots more to go, but it's holding itself in place now. It's already SOLID
  4. A-man930
    Dude.
  5. A-man930
    Working to get this structure flush up against the back of the cab. I used a bunch of clamps across the top and made some pushers for the bottom. Does anyone remember the first time you discovered there isn't a single plumb wall or square corner in your home? Yeah, I feel like I'm discovering all of AMC's production sins, but I know it's really a non-issue.
  6. A-man930
    So, is anyone going to end up with one of these? I'm not ready to buy yet, but am wondering about the fitment.
  7. A-man930
    I decided to do some kickers down to the frame. Even though they're short, they'll surely help limit some twist.
  8. A-man930
    I don't know if it's correct, but i went with a closed-cell foam for the inside of the box. No, I haven't had an opportunity to see how it holds up
  9. A-man930
    Finally...
  10. A-man930
    First day in 2026 warm enough for this:
  11. A-man930
    Been plugging away at stripping it down. I swear there isn't more than 2 square feet of flat surface in these engine bays
  12. A-man930
    Flushing any parallel-flow heat exchanger is basically a waste of time. 90% of it can be blocked up with junk without noticeably affecting flow. If I'm understanding your situation correctly, I bet you've got a clogged radiator.
  13. A-man930
    Any updates to this?
  14. A-man930
    I've always wondered how badly that extra leverage will wear the ball joints.
  15. A-man930
    The only thermostat "adventures" I had when I ran the 4.0 ended with me having to buy an OEM one. Several others prior to that misbehaved. Not sure if you can buy them anymore, but I would heavily consider it.
  16. A-man930
    Many thanks. I'm glad I asked because I was about to close up the yellow ones!
  17. A-man930
    Ok, this is somewhat a case of me being too lazy to clamber into the attic and dig up the wiper linkage, but what are these for?
  18. A-man930
    Looking a little closer, I can see my Sharpie labels under the overspray - the square hole says throttle, and the top one next to it says cruise. I'm guessing the other is speedometer. For the ones next to the clutch master, I had totally forgotten about the hood release cable. Thank you!
  19. A-man930
    I've had this thing apart for so long that I can't recall what these holes are for. I'm considering plugging them. Cruise control?
  20. A-man930
    Glad I stumbled upon this; had no idea there was a check valve inside.
  21. A-man930
    This. Cut the crimps, clean up the pipes, replace the hoses.
  22. A-man930
    Only bits of progress lately. The list of "while the engine is in for mock-up" is basically checked off. Last few items are: ✔️ coolant pipe ✔️ airbox I hope to be pulling the drivetrain before Christmas.
  23. A-man930
    It looks like a ZJ grille
  24. A-man930
    Add me to the list of those who would likely go in on a group buy. If they do produce an MJ part, would it be a limited production run? Has a group-buy discount been mentioned at all, or just the opportunity for development costs to be waived?
  25. A-man930
    I had no idea such a thing existed. What does the pricing look like with the design costs waived?
×
×
  • Create New...