jtdesigns

I guess I can try the Lucas before I dig into the engine.. I really feel thats just a band-aid though. Maybe it'll give me a cushion to find a engine core and rebuild it. Brent think you can talk to that Technician and get the specifics of doing the bearings?

Yeah Brent I changed to the Rotella first thing when I got the truck. I'm using the Rotella because of its high Zinc content. I've been using it in my Rodeo for about 2 years, because of a top end lifter tap. I've heard of replacing bearings with engine still in, but never tried it. I think I could do it with a lil info.. 1) Will I have to get deferent sized bearings? 2) Do the main and rod bearings?? 3) Torque numbers on the caps 4) Do I have to remove the front axle beam?? (2wd) I have no problem doing this I've just never have before..

Think AutoZone or Advanced rents one out?

One more thing,,, is there a kit to test oil pressure with a gauge like fuel pressure gauge or compression tester?? Not been running long on new oil change,, purelator filter, Rotella 15 40 diesel spec'ed oil..

Having a issue with my oil pressure.. 40 psi at start up then about after 15 mins driving it drops way down.. At idle its down low around 2 or 3 psi hit the peddle it pops right up to around 20psi.. It almost seems to me that the gauge is clicking the needle, ie; it'll be low at 3 psi then bring rpms up and the gauge kinda "pops" back up, but only to 20psi... Any ideas on what to check??? Think it may just be the gauge or sensor????

Very few accidents show up on carfax. I would be surprised if this one did, though to be fair carfax is managing to snoop around and intrude more into our personal lives so it might happen. Might be deferent in CO I know in NC it has to be reported to the state if any funds were giving,, something like that.. I'll ask a friend of mine exactly what it is that happens.. He was telling me something like not very long ago..

You just want to buy it cause it has a JEEP on the can... :roll: :D

holy rasta pirate batman your right on.... creepy... looks like Salvador Dalvi

Wow that truck showed no signs of torque.... It might need lower gears in the rears... :brows:

Man al least you got to keep a clean title, but that accident will still show up on a carfax.. Sounds like you came out smelling like flowers instead of something else!! ;)

Man you don't want to use one of the lil power sprayers... They SUCK!! Now I have this industrial type of painter that you plug in and run a tube into your paint container then it has a40 ft hose and gun that you spray from. It works really good.. Those lil power sprayers are good for nothing.. They spit globs, load up all the time, and vibrate your hand off, oh and talk about overspray,, shiiiiiit you'll be covered from head to boots.. don't ever buy one.

No the other socket is for the POWER/COMFORT switch illumination lamp. JT, you should stick a switch and bezel in there and get it working. The AW4 shifts much better in the POWER position IMHO. I don't have an auto Don,,, what would you do with it?

Cool... Thanks guys.. I knew it was something that the xj had wired, but didnt know.. Now.... What to use it for... wonder if I can wire it to turn the fogs on without the lights being turned on, or something bada$$

. . . Its on the right side of the column to the left of the cigar lighter.. Image Not Found Image Not Found

4, 6, 8 cyl....wouldn't matter, that Integra would smoke most of them, that's a fast little ride. My sister had one, they love to rev! Right you are G-money... I have a Prelude with Vtak,, and yeah it will get up and out of its own way... But still I think that truck was a 4 banger.. I don't know mostly because a 4.ol will throw you back way more then that camera was moving around.. I think if it was a 4.0 That cam would have not been able to kelp as steady as it was.. Just a theory... :roll:

Its a Acura Integra. That truck must be a 4cyl.

I think thats a good idea just to do the lower half...

OK you can bookmark the link and always come back to this room... Look on the top right and click login. Put your email addy and click that you don't have your password.. here's the link again http://www.chatzy.com/356793059116

Click on join chat on the bottom and change your name

I guess it works!!!

hummmm,,,, see if this works... I made a private chat room.. Click the link and send message http://www.chatzy.com/goto.cgi?356793059116,jtdesigns1@yahoo.com,6m1xo

No thats the EPIC tether ball....

Maybe Pingpong then.... I know Ive seen wait,,, I think it was TNT... something about the fold up console in the middle with cup holders ....... hE11 I can't remember who but Ive seen it somewhere on here...

:thumbsup:

Of course check for leaks,,, I guess you could do a quick check on the check valve too....