Jump to content

Jeep Comanche 4.5in lift leaf springs


HOrnbrod
 Share

Recommended Posts

I'm not 100% sure if that would net you 9-10" of lift.. Guessing that from SOA's giving you 4-5" and those springs are 4.5 lift.. someone will chime in I'm pretty sure.

 

you would probably get a 9-10in lift if you did that. and you would get a really high center of gravity as well.

Link to comment
Share on other sites

doing some figuring to see what i'll need one of these days. i only want a 6.5 inch lift. now do the front and rear equal out if you do it front and rear that height or what do you have to do? i know you get an mj lift for the front, and either a aal or soa for the rear, and i am going to do a soa for the rear.

Link to comment
Share on other sites

6.5 is easy, grab some old MJ leafs or explorer leafs and bastard pack the two together on SOA til desired ride height is accomplished :cheers:

 

front, grab some rubicon express (doesn't really matter who's springs but i swear by RE) 5" springs or 6" springs and use a small spacer to get your 1/2"

 

at 6+" you'll NEED to address control arms and probably steering. and definitely track bar. a drop bracket kit for CA's would do it, or a Long arm kit, anything for a 6" cherokee lift will work

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...