Muncher Posted December 29, 2024 Author Share Posted December 29, 2024 31 minutes ago, M.T.Hands said: does it use the factory selector in the cab, looks slick Yes it does very easy install. Link to comment Share on other sites More sharing options...
Muncher Posted February 2 Author Share Posted February 2 Cross over steering installed with fox stabilizer got it all alligned and wheel spacers In so no more rubbing on the tail ends. Starting to look good. But damn a 4.0 with rhe ba10 is a dog on the highway Link to comment Share on other sites More sharing options...
watchamakalit Posted February 2 Share Posted February 2 Looking good for sure. The 4.0 isn't necessarily a dog. What gears are you running? Link to comment Share on other sites More sharing options...
Htchevyii Posted February 3 Share Posted February 3 If you've got 3.07 gears, it probably is a dog. Mine was great with the tiny stock tires. I've got 3.73's now and will eventually upgrade to 4.11 or 4.56. Link to comment Share on other sites More sharing options...
89 MJ Posted February 4 Share Posted February 4 I’ll say the 4.0 is no high performance unit, but I think it does decent with the proper gearing. I can chirp 3rd in mine if I really want to with my 4.10s and 31s. Link to comment Share on other sites More sharing options...
Muncher Posted February 11 Author Share Posted February 11 On 2/3/2025 at 8:40 PM, 89 MJ said: I’ll say the 4.0 is no high performance unit, but I think it does decent with the proper gearing. I can chirp 3rd in mine if I really want to with my 4.10s and 31s. Yeah mines 3.07s. Jusy about as slow or slower then my 300td with this setup which is wild 🤣 Link to comment Share on other sites More sharing options...
Muncher Posted February 11 Author Share Posted February 11 Also of course doing o rings and my fuel rail pressure relif snaps off. Link to comment Share on other sites More sharing options...
Muncher Posted February 13 Author Share Posted February 13 After fighting o rings and my fuel rail for 2 days I finally got that squared away now none of them leak. Ones slightly pinched in the block side but no leakage when it warms up and when revving it so i guess it's good to go. Link to comment Share on other sites More sharing options...
Muncher Posted February 17 Author Share Posted February 17 Link to comment Share on other sites More sharing options...
Muncher Posted March 2 Author Share Posted March 2 Link to comment Share on other sites More sharing options...
Muncher Posted March 28 Author Share Posted March 28 New tail lights and China bosh special injectors. Link to comment Share on other sites More sharing options...
Muncher Posted July 31 Author Share Posted July 31 No more topper now. New carpet ordered speakes and single din with car play. Also should be picking up a sentry system sometime next week! Dream part for me can't wait. Link to comment Share on other sites More sharing options...
GonzoTheGreat Posted July 31 Share Posted July 31 2 hours ago, Muncher said: Hey! I've done some contract work down there! mostly for the big one in Wareham, but I've been to all the CT branches. That claw machine is pretty wild! Also nice score on the Sentry! Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 31 Share Posted July 31 Well. It would be the only working sentry in an MJ and it’s very much doable. Link to comment Share on other sites More sharing options...
Muncher Posted August 3 Author Share Posted August 3 On 7/31/2025 at 11:10 AM, eaglescout526 said: Well. It would be the only working sentry in an MJ and it’s very much doable. I've heard the sensors aren't hard to wire up. I'm trying to go asap this week so I can get it. It'll be a dream come true. Link to comment Share on other sites More sharing options...
Muncher Posted August 3 Author Share Posted August 3 On 7/31/2025 at 9:48 AM, GonzoTheGreat said: Hey! I've done some contract work down there! mostly for the big one in Wareham, but I've been to all the CT branches. That claw machine is pretty wild! Also nice score on the Sentry! Thats awseome too know lol small world that's where I work currently Link to comment Share on other sites More sharing options...
eaglescout526 Posted August 3 Share Posted August 3 1 hour ago, Muncher said: I've heard the sensors aren't hard to wire up. I'm trying to go asap this week so I can get it. It'll be a dream come true. No they’re not. The hardest one though is the front axle and you’re gonna want the front axle too. Link to comment Share on other sites More sharing options...
Muncher Posted August 4 Author Share Posted August 4 6 hours ago, eaglescout526 said: No they’re not. The hardest one though is the front axle and you’re gonna want the front axle too. Where does the front axle one go? Link to comment Share on other sites More sharing options...
eaglescout526 Posted August 4 Share Posted August 4 23 minutes ago, Muncher said: Where does the front axle one go? In the absolute least convenient spot to get a drill bit to. The right (or left depending on how you’re looking at it)side of the pumpkin where the LCA bolts to… Link to comment Share on other sites More sharing options...
Muncher Posted August 7 Author Share Posted August 7 Got a unusual part for the mj Link to comment Share on other sites More sharing options...
Muncher Posted August 7 Author Share Posted August 7 Link to comment Share on other sites More sharing options...
eaglescout526 Posted August 7 Share Posted August 7 You’ll be the only MJ that has it. It’s very doable. Link to comment Share on other sites More sharing options...
Muncher Posted August 14 Author Share Posted August 14 New China radio installed slightly trimmed dash panel very impressive radio. Also installed the sentry and jusy have it wired so the clock works for now have to pick up other sensors soonn. Link to comment Share on other sites More sharing options...
Muncher Posted Friday at 02:06 AM Author Share Posted Friday at 02:06 AM Interior paint first layer done. Gotta finish painting and wait for my seat brackets and ill put thr new carpet ans all the interior in. Link to comment Share on other sites More sharing options...
Muncher Posted Saturday at 01:47 AM Author Share Posted Saturday at 01:47 AM 3 coats done on the interior and just got my brackets in to use the xj seat sliders. Should have my interior in tommrow Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now