92comanche4x4 Posted December 23, 2007 Share Posted December 23, 2007 I just bought a 92 jeep comanche I'm goin to do new floorpans, rockers doors and a bed and wensday I'm putting my 6in lift on I'm doing the soa it needs some work but it drives straigt down the road it has the 4.0 high output i bought some 31 bfg all terrains for it here's some pics of it now ill be done with the lift after x-mas let me know what you think and if you have any parts like doors tail gate tail lights and if your in or close to michigan Link to comment Share on other sites More sharing options...
comancheon33 Posted December 23, 2007 Share Posted December 23, 2007 Were you out of breath after that long of a run on sentence? Anyways nice find and good luck with the build. Link to comment Share on other sites More sharing options...
92comanche4x4 Posted December 28, 2007 Author Share Posted December 28, 2007 here's what it looks like now i found a set of cheap rims on craigslist and i bought some bfg allterrains 31/10.5/15 I'm starting to tare the carpe out and fix the holes in the floor pans and after that the lift Link to comment Share on other sites More sharing options...
JeepcoMJ Posted December 28, 2007 Share Posted December 28, 2007 those rims are identical to mine, except a bit bigger center hole. I really wish I could find more of them... Link to comment Share on other sites More sharing options...
92comanche4x4 Posted December 29, 2007 Author Share Posted December 29, 2007 mine are american racing rims I'm not sure but thats what the center caps say Link to comment Share on other sites More sharing options...
92comanche4x4 Posted December 29, 2007 Author Share Posted December 29, 2007 for my floor it has a hole in the drivers side and passenger side and I'm gonna use fiberglass and resin until i get a welder and floor pans what do you think? is fiber glass a good idea? any body have any suggestions Link to comment Share on other sites More sharing options...
pingpong Posted December 29, 2007 Share Posted December 29, 2007 I wouldnt... it will seal in moisture. Personally.. I would remove all the bad metal and make a patch panel... Use sheetmetal screws to fasten said panel in.. then find a "jeeping" buddy with a flux core welder.. and have him weld. remove one screw.. place a tack.. you wil find you might be able to get help if all the hard work is done Link to comment Share on other sites More sharing options...
Blue XJ Posted December 29, 2007 Share Posted December 29, 2007 Is this the one that was for sale in Algonac? Link to comment Share on other sites More sharing options...
92comanche4x4 Posted December 29, 2007 Author Share Posted December 29, 2007 yup it is the one in algonac he wanted to trade me for my blazer so i did i always wanted a comanche . i put the wheels and than some new shocks on it and thats it but i got the day off of work today so I'm gonna go out on it Link to comment Share on other sites More sharing options...
92comanche4x4 Posted January 20, 2008 Author Share Posted January 20, 2008 i got some pics of it with diffrent wheels until i get my lift on it so i don't rub. i havent done to much to it so far but soon to come a lift, bfg mud terrains, roll bar, off road lights. Link to comment Share on other sites More sharing options...
Drahcir495 Posted January 22, 2008 Share Posted January 22, 2008 Loving the arrow antenna :brows: Link to comment Share on other sites More sharing options...
92comanche4x4 Posted January 22, 2008 Author Share Posted January 22, 2008 evry hunter has to have one lol gitrdone Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 22, 2008 Author Share Posted March 22, 2008 doing the lift on my truck tonight or tommarow watch for pics Link to comment Share on other sites More sharing options...
Pete M Posted March 22, 2008 Share Posted March 22, 2008 I thought you were waiting until after you moved? Just couldn't wait, eh? :D Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 22, 2008 Author Share Posted March 22, 2008 doin it in my cousins girl friends dads garge Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 25, 2008 Author Share Posted March 25, 2008 ok guys got the 3in lift on in the front i was kinda pissed it didnt sit higher but its only till i get my 5.5in RE all done Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 25, 2008 Author Share Posted March 25, 2008 what do you guys think? Link to comment Share on other sites More sharing options...
Pete M Posted March 25, 2008 Share Posted March 25, 2008 I think you need to stand a bit closer to the truck when you take pictures. :D Link to comment Share on other sites More sharing options...
offroader461 Posted March 25, 2008 Share Posted March 25, 2008 from the pic of the truck sitting there it looks like you need some longer LCA...looks like the tire is too far back in the wheel well....get a closer pic of it Link to comment Share on other sites More sharing options...
Pete M Posted March 26, 2008 Share Posted March 26, 2008 It looks that way because they are. He's running the stock LCAs. This was an intermediate step before the rest of the parts are assembled to go for a full 4.5" lift. He's not very good with patience. :D Link to comment Share on other sites More sharing options...
offroader461 Posted March 26, 2008 Share Posted March 26, 2008 It looks that way because they are. He's running the stock LCAs. This was an intermediate step before the rest of the parts are assembled to go for a full 4.5" lift. He's not very good with patience. :D me either...I'm very impatient with my MJ too...like instead of doing the SOA first i put in the AAL and shackle...still to low so now all that comes out and the SOA is getting done hopefully this weekend LOL :nuts: Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 26, 2008 Author Share Posted March 26, 2008 once i get a check from work friday for gas I'm goin to pick up my boat clean it up and sell it for 800 and buy 5.5 in re coils ajastuble control arms top and botttom new trac bar http://www.rubiconexpress.com/Products. ... B655088932 http://www.rubiconexpress.com/Products. ... B655088932 http://www.rubiconexpress.com/Products. ... B655088932 http://www.rubiconexpress.com/Products. ... B655088932 Link to comment Share on other sites More sharing options...
Motion Offroad Posted March 26, 2008 Share Posted March 26, 2008 If your going to use the RE HD tracbar (1660) you will also need the mount to use it on your Jeep. It's part number 1665. Also remember that RE coils sit higher than advertised. A RE 5.5" coil will sit at 6-6.25". Link to comment Share on other sites More sharing options...
92comanche4x4 Posted March 26, 2008 Author Share Posted March 26, 2008 I was thinkin' about going through you. Pete was telling me about you guys saturday night. could you price me together a kit including all the stuff I just put. I don't care what brand stuff just cheap Link to comment Share on other sites More sharing options...
Pete M Posted March 26, 2008 Share Posted March 26, 2008 You should care what brand. If you go too cheap, you'll spend lots of money and likely regret it. RE makes quality stuff. Can't go wrong. :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now