Jtslick89 Posted December 22, 2022 Share Posted December 22, 2022 Does anyone know of a company or process (such as 3D printing/molding) that I can contact about potentially re-producing a specific part(s)? I am referring to the XJ Wagoneer specific side markers. Thank you in advance. Link to comment Share on other sites More sharing options...
Pete M Posted December 22, 2022 Share Posted December 22, 2022 um, so back on topic, Nathaniel is printing various colors of the regular side markers. not for sale yet, but if they work out I imagine it wouldn't be too much a stretch to do waggy lights. Link to comment Share on other sites More sharing options...
Jtslick89 Posted December 22, 2022 Author Share Posted December 22, 2022 8 minutes ago, Pete M said: um, so back on topic, Nathaniel is printing various colors of the regular side markers. not for sale yet, but if they work out I imagine it wouldn't be too much a stretch to do waggy lights. thank you, pete! Link to comment Share on other sites More sharing options...
OffGridResearch Posted January 13, 2023 Share Posted January 13, 2023 Send us a set of lights and we can do it. Link to comment Share on other sites More sharing options...
OffGridResearch Posted January 13, 2023 Share Posted January 13, 2023 1 hour ago, saveevryjp1998 said: Are you able to do the waggy turn signals as well? I am willing to lend a set of waggy side markers, turn signals, and rear tail lamps if your interested in making like a led kit. I can definitely reproduce the Lights behind the Grill. Link to comment Share on other sites More sharing options...
OffGridResearch Posted January 13, 2023 Share Posted January 13, 2023 1 hour ago, saveevryjp1998 said: I'll dig up stuff this weekend and reach out with a pm to coordinate. Sounds solid! Link to comment Share on other sites More sharing options...
ghetdjc320 Posted January 14, 2023 Share Posted January 14, 2023 6 hours ago, OffGridResearch said: Sounds solid! What we really need you to reproduce is splash guards with both the AMC and Jeep logos. They've got to be stupid simple to remake but I'd bet they sell out right quick Link to comment Share on other sites More sharing options...
Rubikahn Posted May 26, 2023 Share Posted May 26, 2023 On 1/13/2023 at 8:17 PM, ghetdjc320 said: What we really need you to reproduce is splash guards with both the AMC and Jeep logos. They've got to be stupid simple to remake but I'd bet they sell out right quick I spoke to Brandon at one point and asked if he was ever going to make another run of brackets. He said he had no plans to make them again but if IIRC he mentioned he’d share the files if someone else was interested in making them. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted May 26, 2023 Share Posted May 26, 2023 30 minutes ago, Rubikahn said: I spoke to Brandon at one point and asked if he was ever going to make another run of brackets. He said he had no plans to make them again but if IIRC he mentioned he’d share the files if someone else was interested in making them. Since @boxyjeep is making the speaker brackets, these would be very easy to reproduce. Make it from 18g stainless or galvanized. Only has a couple of simple bends. Link to comment Share on other sites More sharing options...
boxyjeep Posted May 26, 2023 Share Posted May 26, 2023 I intend to reproduce these brackets. If someone can share the design files (DXF or otherwise), I can start manufacturing them. If nobody has the file or drawing of specs, I have a set of XJ flaps that I am planning to use to prototype, but am coming up short on getting my hands on an MJ set. I believe XJ and MJ have the same front bracket, but different rear. If someone has MJ rears, I’d love to borrow them. Would even provide a free set of new brackets once I get them created. Link to comment Share on other sites More sharing options...
Rubikahn Posted May 26, 2023 Share Posted May 26, 2023 1 minute ago, boxyjeep said: I intend to reproduce these brackets. If someone can share the design files (DXF or otherwise), I can start manufacturing them. If nobody has the file or drawing of specs, I have a set of XJ flaps that I am planning to use to prototype, but am coming up short on getting my hands on an MJ set. I believe XJ and MJ have the same front bracket, but different rear. If someone has MJ rears, I’d love to borrow them. Would even provide a free set of new brackets once I get them created. I’d suggest reaching out to Brandon Scarborough on FB. I have a set of rear brackets but they’re pretty rusty and bent. Link to comment Share on other sites More sharing options...
boxyjeep Posted May 26, 2023 Share Posted May 26, 2023 4 minutes ago, Rubikahn said: I’d suggest reaching out to Brandon Scarborough on FB. I have a set of rear brackets but they’re pretty rusty and bent. I’ll reach out. Link to comment Share on other sites More sharing options...
boxyjeep Posted May 27, 2023 Share Posted May 27, 2023 He does not have the file or any old units laying around 😞 If anyone has a set, LMK Link to comment Share on other sites More sharing options...
fiatslug87 Posted May 27, 2023 Share Posted May 27, 2023 Pm’ed Link to comment Share on other sites More sharing options...
Rubikahn Posted May 27, 2023 Share Posted May 27, 2023 1 hour ago, boxyjeep said: He does not have the file or any old units laying around 😞 If anyone has a set, LMK That stinks… Link to comment Share on other sites More sharing options...
boxyjeep Posted May 27, 2023 Share Posted May 27, 2023 I may have a set in transit that someone is letting me borrow. Updates to follow. Link to comment Share on other sites More sharing options...
Recommended Posts