Battery cables

[Muncher]

I jusy got a battery cable kit and started putting them in today. I could use some help identify things. I've got one cable going from the relay to the pdc but am unsure where the pdc is. I have a renix motor if rhat helps. Thank you 

[jdog]

Don't have one, you should have a cable from the battery to the starter relay

[Muncher]

12 minutes ago, jdog said:

Don't have one, you should have a cable from the battery to the starter relay

Ok thanks. I do have thay. I dk have a fuse it came with so maybe it goes to that?

[Muncher]

Ok so I re did all my cables and I put them all in and put the battery in and now it won't start. I have power inside but won't start. I had to change the neagitve cable to a different part of the block but besides that everything is the same. What could be wrong ?

[Muncher]

Thinking maybe a bad neagitve battery cable ground but at the same time I do have power in the cab so I'm not sure 

[Pete M]

did you clean up all of the connections at the starter relay? 

[jdog]

does it crank?

[Muncher]

1 hour ago, Pete M said:

did you clean up all of the connections at the starter relay? 

Starter is brand new. 

[Muncher]

23 minutes ago, jdog said:

does it crank?

Usualy it does. But now I jusy have power inside and when I turn the key nothing happeneds

[fiatslug87]

Maybe this thread will help.

 

[jdog]

Double check that all the connections are on the starter relay

[Muncher]

11 minutes ago, jdog said:

Double check that all the connections are on the starter relay

There's just one positive on the starter though ir are you talking about something else ?

[jdog]

the starter relay is on the fender near the battery, it should have 4 terminals and like 5 wires on one terminal

[Muncher]

28 minutes ago, jdog said:

the starter relay is on the fender near the battery, it should have 4 terminals and like 5 wires on one terminal

Oh ok. I know I put the alternator wire on there and the one from the positive terminal to it. There was a couple of other ones on there 2 but ill see tommrow if there's any loose ones.

[ghetdjc320]

Is this a battery cable kit your trying to install?

[Muncher]

Got it back and running thanks guys 

[ghetdjc320]

Awesome. What was the missing cable/ground you needed?

[Tex06]

On 2/26/2021 at 5:45 PM, fiatslug87 said:

Maybe this thread will help.

 

 

Might not. I've a 92 so H.O., not Renix.

[Muncher]

21 hours ago, ghetdjc320 said:

Awesome. What was the missing cable/ground you needed?

I just put in the fuse cable and I had one small wire on the distributor block that I missed