DirtyComanche Posted May 3, 2019 Share Posted May 3, 2019 I believe the NV3550 I purchased is fine as the issues with it were related to the clutch not disengaging. With that said, which clutch should I purchase? Basically limited to what Rockauto sells. Clutches are the same for an external slave AX-15 and a NV3550. Normally I just buy a Luk HD unit. Not sure I'm happy with their quality anymore. I actually have a regular Luk sitting on the shelf too, but really not that into running it... M-Pact offers a steel-backed high performance one they list as being for "off road" applications, plus other things. They also sell a couple other higher end ones, including a ceramic option. Would any of those be a decent idea? AMS also offers two, one is a hybrid organic kevlar (whateverthe@#$% that means) and the other is a kevlar. Sachs has a ceramic as well. Generally I believe Sachs/ZF to be good quality... They don't carry the Sachs mid range (kevlar) clutch though, just the ceramic ones. Sachs says the ceramic one is grabby. Also open to ideas on a flywheel. I think I have a Luk one, but probably just going to order one because I don't want to gamble on that and I pay 2-3X more locally VS Rockauto. Link to comment Share on other sites More sharing options...
mjeff87 Posted May 3, 2019 Share Posted May 3, 2019 15 hours ago, DirtyComanche said: M-Pact offers a steel-backed high performance one they list as being for "off road" applications, plus other things. They also sell a couple other higher end ones, including a ceramic option. Would any of those be a decent idea? How the hell would a clutch know if it was "offroad"? My .02, I"d just go with a Luk. But I'm not crazy with the clutch pedal....the less I have to press it the better. No experience with ceramics, but aren't those usually used with high HP/RPM type applications? Link to comment Share on other sites More sharing options...
DirtyComanche Posted May 3, 2019 Author Share Posted May 3, 2019 1 hour ago, mjeff87 said: How the hell would a clutch know if it was "offroad"? Offroad you slip the clutch a lot more, versus most other applications where you're either only slipping it a little or you want it to be an on/off switch. Or I guess that's the theory. I'm not sure that a ceramic would drive nicely. But that said, modern ceramic brake pads work delightful. Link to comment Share on other sites More sharing options...
Limeyjeeper Posted May 3, 2019 Share Posted May 3, 2019 Lux Gold. Have one in my Wrangler and Comanche. Great clutches. Just don't use their bearing if you buy the kit, poor quality. Link to comment Share on other sites More sharing options...
DirtyComanche Posted May 3, 2019 Author Share Posted May 3, 2019 41 minutes ago, Limeyjeeper said: Lux Gold. Have one in my Wrangler and Comanche. Great clutches. Just don't use their bearing if you buy the kit, poor quality. Lux? Link to comment Share on other sites More sharing options...
Limeyjeeper Posted May 3, 2019 Share Posted May 3, 2019 Sorry I meant LUK. Link to comment Share on other sites More sharing options...
kryptronic Posted May 3, 2019 Share Posted May 3, 2019 Luk is the only brand clutch I've ever seen recommended for our Jeeps. Link to comment Share on other sites More sharing options...
Jeep Driver Posted May 3, 2019 Share Posted May 3, 2019 14 minutes ago, kryptronic said: Luk is the only brand clutch I've ever seen recommended for our Jeeps. Yep. Link to comment Share on other sites More sharing options...
Jeep Driver Posted May 3, 2019 Share Posted May 3, 2019 1 hour ago, Limeyjeeper said: Lux Gold. Have one in my Wrangler and Comanche. Great clutches. Just don't use their bearing if you buy the kit, poor quality. Are you referring to the plastic TOB? Mine has been out a couple of times due to bad trans after the clutch replacement. I've had a new National brand cast steel here, the plastic LUK went back in, nothing at all wrong with the TOB. Link to comment Share on other sites More sharing options...
Limeyjeeper Posted May 4, 2019 Share Posted May 4, 2019 Well known issue. I put the LuK one in my Wrangler howled from day 1, replaced it with a steel National one and no issues. Plenty of people have had the same issue. Sent from my SM-G955U using Tapatalk Link to comment Share on other sites More sharing options...
DirtyComanche Posted May 4, 2019 Author Share Posted May 4, 2019 99% of clutch issues I see on Jeeps involve Luk. The one in my 88 basically gave up the ghost snow wheeling. That was a HD and the engine is stock... Link to comment Share on other sites More sharing options...
kryptronic Posted May 4, 2019 Share Posted May 4, 2019 7 hours ago, DirtyComanche said: 99% of clutch issues I see on Jeeps involve Luk. This could simply be because Luk is the de-facto replacement, and that's what 99% of Jeeps run. Link to comment Share on other sites More sharing options...
Jeep Driver Posted May 4, 2019 Share Posted May 4, 2019 Or it could be that 99% of Jeep drivers don't know how to drive a stick. Dead serious about that. I have no idea how it is that people burn up clutches. Link to comment Share on other sites More sharing options...
Limeyjeeper Posted May 4, 2019 Share Posted May 4, 2019 I agree. Being born in a country where nobody drove an auto when I learned to drive I cringe when I see some of the stick shift driving that goes on!!! Link to comment Share on other sites More sharing options...
Big Dan Posted May 5, 2019 Share Posted May 5, 2019 On 5/3/2019 at 5:35 PM, Jeep Driver said: Are you referring to the plastic TOB? Mine has been out a couple of times due to bad trans after the clutch replacement. I've had a new National brand cast steel here, the plastic LUK went back in, nothing at all wrong with the TOB. I agree. The "YOU MUST REPLACE IT" non sense is over hyped. Link to comment Share on other sites More sharing options...
DirtyComanche Posted May 6, 2019 Author Share Posted May 6, 2019 On 5/4/2019 at 7:01 AM, Jeep Driver said: Or it could be that 99% of Jeep drivers don't know how to drive a stick. Dead serious about that. I have no idea how it is that people burn up clutches. Maybe, but not helpful to my thread. Nobody here has used anything but a Luk. Therefore we have no useful data. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now