Ls2xjcomanche Posted March 31, 2019 Share Posted March 31, 2019 A few months ago I brought my MJ in to get the headliner reupholstered. Long story short, the shop pulled the headliner then told me that the headliner wasn’t in good enough condition to reupholster. Not sure I agree but that’s besides the point. Ended up driving around a few months without a headliner. After doing some research and seeing the positive reviews I decided to purchase a SMS headliner, which fits perfectly btw. The PO didn’t do a great job with the visors so I had them reupholstered. I’m in the process of installing them and having issues. Can’t figure out what is going on but the visor ends touch and don’t line up with the center brackets at all. Not sure what’s going on or what I might be missing. Any ideas/advice would be greatly appreciated. Link to comment Share on other sites More sharing options...
Ls2xjcomanche Posted March 31, 2019 Author Share Posted March 31, 2019 Closer up picture of the issue I’m running into. Link to comment Share on other sites More sharing options...
Ls2xjcomanche Posted March 31, 2019 Author Share Posted March 31, 2019 Link to comment Share on other sites More sharing options...
Kjell Posted March 31, 2019 Share Posted March 31, 2019 n Link to comment Share on other sites More sharing options...
Kjell Posted March 31, 2019 Share Posted March 31, 2019 do not know if they can even be mounted on the wrong side ,had the mirror on pass side so i dident try that mistake Link to comment Share on other sites More sharing options...
fiatslug87 Posted March 31, 2019 Share Posted March 31, 2019 Slide the visors towards the mount on the rod, that may give you enough clearance for center clips. edit: I missed the third pic. Link to comment Share on other sites More sharing options...
Pete M Posted March 31, 2019 Share Posted March 31, 2019 aren't there 2 different types of visors where one variation has the latch points closer together than the other? Link to comment Share on other sites More sharing options...
Kjell Posted March 31, 2019 Share Posted March 31, 2019 My visors wasent in place when i bought the MJ, had the same problem installing them untill i slide/turned the mount. Not 100 sure but looks like the same visors and center mount i have... the other type have a different shape. Link to comment Share on other sites More sharing options...
Ls2xjcomanche Posted April 1, 2019 Author Share Posted April 1, 2019 9 hours ago, fiatslug87 said: Slide the visors towards the mount on the rod, that may give you enough clearance for center clips. edit: I missed the third pic. Thanks this worked! I wasn’t aware that the rods were adjustable and was worried about putting too much force on them since I just paid a decent amount to get them redone. Turned out great! Thanks for all the input and advice! Link to comment Share on other sites More sharing options...
Pete M Posted April 1, 2019 Share Posted April 1, 2019 they look fantastic Link to comment Share on other sites More sharing options...
Kjell Posted April 1, 2019 Share Posted April 1, 2019 Link to comment Share on other sites More sharing options...
MeanLemons Posted April 1, 2019 Share Posted April 1, 2019 21 hours ago, Ls2xjcomanche said: Thanks this worked! I wasn’t aware that the rods were adjustable and was worried about putting too much force on them since I just paid a decent amount to get them redone. Turned out great! Thanks for all the input and advice! I really like your interior Link to comment Share on other sites More sharing options...
JMO413 Posted April 1, 2019 Share Posted April 1, 2019 Good looking interior! Link to comment Share on other sites More sharing options...
Ls2xjcomanche Posted April 2, 2019 Author Share Posted April 2, 2019 Thanks! When I bought my comanche I wasn’t aware that black was a rare interior color. It’s almost done currently getting a bench seat reupholstered in black and the interior should be almost complete. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now