shrapneltyphoon Posted September 15, 2018 Share Posted September 15, 2018 Well I've hit a small wall on getting my wagoneer back to normal after the nice insuranceless man backed into both passenger doors. I can't find any damn clips for the surround trim. So I was wondering if anyone has ever tried emachineshop or another company that does 3d printing of small batch parts? Any help would be appreciated on this since I'm a bit stubborn on keeping the wood on this thing. Link to comment Share on other sites More sharing options...
saveevryjp1998 Posted September 15, 2018 Share Posted September 15, 2018 There is a place that specials in Full size wagoneer parts. I can't remember the name. I would try searching through that source, it may be the same. I know they sell the woody veneer etc. Link to comment Share on other sites More sharing options...
HOrnbrod Posted September 15, 2018 Share Posted September 15, 2018 Try HERE. Link to comment Share on other sites More sharing options...
shrapneltyphoon Posted September 15, 2018 Author Share Posted September 15, 2018 No go. Took this dang thing down to Napa and they couldn't find a clip close to it. Most of my online searches yeilded nothing as well. In my mind I really wish it was just riveted on like the full size wagoneers now. Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted September 15, 2018 Share Posted September 15, 2018 J4006530 is the part number, if that helps at all Link to comment Share on other sites More sharing options...
shrapneltyphoon Posted September 15, 2018 Author Share Posted September 15, 2018 It helped a little but yup. Obsolete parts hard to find apparently. Link to comment Share on other sites More sharing options...
Pete M Posted September 15, 2018 Share Posted September 15, 2018 in this day and age someone should be able to 3d that little guy. Link to comment Share on other sites More sharing options...
Jeep Driver Posted September 15, 2018 Share Posted September 15, 2018 Go to your local auto paint store, the older the store the better, they have entire displays of fasteners. Local dealer has access to "Vintage Parts", check there. Look up Crist Clapper here- If anyone knows of a source it's him- https://www.naxja.org/forum/showthread.php?t=1091129&page=18 Link to comment Share on other sites More sharing options...
saveevryjp1998 Posted September 16, 2018 Share Posted September 16, 2018 You tube d.y.i. injection molding since it looks like you got 1. Link to comment Share on other sites More sharing options...
fiatslug87 Posted September 16, 2018 Share Posted September 16, 2018 My brother has a scanner and 3D printer. PM me if you're willing to send the clip to me for scanning. It will probably be made in ABS, is that OK? Link to comment Share on other sites More sharing options...
saveevryjp1998 Posted October 9, 2018 Share Posted October 9, 2018 Can you post pics of the other side of that clip in the pic? I may have found a couple. I will also look for something similar that may work as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now