Pete M Posted April 23, 2018 Share Posted April 23, 2018 when anyone gets a chance, can we confirm that these measurements are center of ujoint cap to center of ujoint cap? Quote lwb,_2.8,____tf 3speed,____np207,_amc20= 53"_____d35= 54" lwb,_2.8,____ax5-ax4,______np207,_amc20= 53.75"__d35= 54.75" lwb,_2.8,____ax5-ax4,______2wd,___amc20= 63.75"__d35= 64.75" lwb,_4.0,____aw4,__________np231,___d44= 47.5"___d35= 48.25" lwb,_4.0,____aw4,__________2wd,_____d44= _______ d35= 59.5" lwb,_4.0,____ax15-ba10/5,__np231,___d44= 49"_____d35= 50" lwb,_4.0,____ax15-ba10/5,__2wd,_____d44= ________d35= # swb,_4.0,____aw4,__________np231,___d44= 41.25"__d35= 42.35" swb,_4.0,____aw4,__________2wd,_____d44= 52.125"_d35= 53.125" * swb,_4.o,____ax15-ba10/5,__np231,___d44= 42.25"__d35= 43.25" swb,_4.0,____ax15-ba10/5,__2wd,_____d44= 52.125"_d35= 53.125" * lwb,_2.5,____ax5-ax4,______2wd,_____d44= 63.75"__d35= 64.75" swb,_2.5,____ax5-ax4,______2wd,_____d44= 57.5"___d35= 58.5" lwb,_2.5,____ax5-ax4,______np231,___d44= ________d35= 53.25" swb,_2.5,____ax5-ax4,______np231,___d44= ________d35= # lwb,_2.5,____tf 3speed,____np207,_amc20= 53"_____d35= 54" Link to comment Share on other sites More sharing options...
HOrnbrod Posted April 23, 2018 Share Posted April 23, 2018 lwb,_4.0,____aw4,__________2wd,_____d44= _59.5"_______d35= # Link to comment Share on other sites More sharing options...
Pete M Posted April 23, 2018 Author Share Posted April 23, 2018 nice! added to the list. Link to comment Share on other sites More sharing options...
Swampy Posted April 24, 2018 Share Posted April 24, 2018 I have nothing to contribute for any of these combinations Link to comment Share on other sites More sharing options...
Pete M Posted April 28, 2018 Author Share Posted April 28, 2018 anyone? Link to comment Share on other sites More sharing options...
MeanLemons Posted April 29, 2018 Share Posted April 29, 2018 It’s currently raining outside. I will measure my 88 MJ with 4.0L and 2wd AW4 & D35. Link to comment Share on other sites More sharing options...
desertmike Posted April 29, 2018 Share Posted April 29, 2018 My 88 SWB 4.0 ba10 might be 1/8 inch longer. Upgraded to AX15 years ago but same shaft. Bought truck new so no changes. swb,_4.o,____ax15-ba10/5,__np231,___d44= 42.25" I've got 42 3/8". Link to comment Share on other sites More sharing options...
MeanLemons Posted April 30, 2018 Share Posted April 30, 2018 23 hours ago, MeanLemons said: It’s currently raining outside. I will measure my 88 MJ with 4.0L and 2wd AW4 & D35. It’s 59.5” long Link to comment Share on other sites More sharing options...
Pete M Posted April 30, 2018 Author Share Posted April 30, 2018 wait, that's the same as Don's and he has the d44. every one is measuring center to center, yes? Link to comment Share on other sites More sharing options...
HOrnbrod Posted April 30, 2018 Share Posted April 30, 2018 44 minutes ago, Pete M said: wait, that's the same as Don's and he has the d44. every one is measuring center to center, yes? Si. My driveshaft, slip yoke, and pinion yoke are not stock, so if Mean Lemon is stock, he's probably correct for his configuration. Link to comment Share on other sites More sharing options...
Pete M Posted April 30, 2018 Author Share Posted April 30, 2018 updated Link to comment Share on other sites More sharing options...
MeanLemons Posted April 30, 2018 Share Posted April 30, 2018 Yes. Center of u joint on the slip yoke to the center of u joint on the axle. Although I currently have a 8.25 on it, I still used the same driveshaft from when it had the d35 on it. Link to comment Share on other sites More sharing options...
ParadiseMJ Posted May 1, 2018 Share Posted May 1, 2018 swb,_4.0,____aw4,__________np231,___d44= 41.25" The driveline shop in town must have had this, because when I swapped the AW4 into my SWB - 4.0 - BA-10 - NP 231 - D44 he shortened the shaft 1" (and painted it too ). Link to comment Share on other sites More sharing options...
Pete M Posted May 7, 2018 Author Share Posted May 7, 2018 no one else can be bothered to crawl under their truck to verify a measurement? Link to comment Share on other sites More sharing options...
DirtyComanche Posted May 7, 2018 Share Posted May 7, 2018 2 hours ago, Pete M said: no one else can be bothered to crawl under their truck to verify a measurement? Mine isn't useful info, I don't think? I have a SYE. Link to comment Share on other sites More sharing options...
Pete M Posted May 7, 2018 Author Share Posted May 7, 2018 probably not. Link to comment Share on other sites More sharing options...
Wiggilez Posted May 10, 2018 Share Posted May 10, 2018 Il try to verify the 86 2.8 ax5 np207 d35 this weekend. The drive shaft has to be in that damn shed somewhere. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now