cruiser54 Posted April 21, 2018 Share Posted April 21, 2018 Fuel injection related only. What CAN'T we get? Or, are we getting fake news regarding availability? NAXJA hit a dead end in the link below. http://www.naxja.org/forum/showthread.php?t=1136697 Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 21, 2018 Share Posted April 21, 2018 NAXJA........... ..........excuse me while I yawn, repeatedly. Link to comment Share on other sites More sharing options...
cruiser54 Posted April 22, 2018 Author Share Posted April 22, 2018 23 hours ago, Jeep Driver said: NAXJA........... ..........excuse me while I yawn, repeatedly. I know....LOL. But what are they? I don't care about the waggy grille parts and taillamps and that stuff. Renix parts. What can't we get anymore? Link to comment Share on other sites More sharing options...
MeanLemons Posted April 22, 2018 Share Posted April 22, 2018 Intake air temp sensors but there’s thread here on using a replacement from a gm vehicle. (I bought one of them along with the pigtail. Link to comment Share on other sites More sharing options...
TheDude Posted April 23, 2018 Share Posted April 23, 2018 I usually grab throttle body's, coil/IBM, and the throttle linkage arm. Apparently ICMs alone are $120 at the parts store...Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Ωhm Posted April 23, 2018 Share Posted April 23, 2018 Fusible Links until someone can come up with a rating for each link used. EDIT: Just realized Fuel Injection related only. Link to comment Share on other sites More sharing options...
DirtyComanche Posted April 23, 2018 Share Posted April 23, 2018 There's nothing I can think of. Some stuff is a little hard, but they made enough of these things that there is typically a couple different aftermarket options for everything, plus most of the sensors seem to basically be GM in nature (some require some rewiring), so that leaves lots of options. I think the true Renix parts might be worth hording a bit. If I can find ECMs and ICMs I will always take them. More because I'm worried they will become really expensive rather than just being unavailable. Link to comment Share on other sites More sharing options...
cruiser54 Posted April 23, 2018 Author Share Posted April 23, 2018 10 hours ago, Ωhm said: Fusible Links until someone can come up with a rating for each link used. EDIT: Just realized Fuel Injection related only. I'm good with that. I used to have the ratings.............. Ok. Can someone dig up the IAT part number and post it up? I've never seen one go bad, but I have seen them come back into spec by cleaning them with brake cleaner. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now