Jump to content

The Last Comanche Standing


TheDirtyJeep401
 Share

Recommended Posts

So today we were on our way up to Lamar to get my brothers car. A 96 Eclipse. Since my moms car needs new tires since she had a flat, we had to take my dads Dodge Ram. On our way up there the wheel hub bearing went out, but it had to pull through.

 

We get to Lamar and look at the car. And deciede to buy it for $700. We took the backroads home so we didnt have to take the Ram on the highway again. 18 miles outside of Joplin the Eclipse starts to smoke. I get out and told my mom to pop the hood. Antifreeze was leaking everywhere, then I found the source. The overflow tank had a huge crack in it and was letting it leak everywhere.

 

So my bro and mom stayed with the car while my dad and I went back into town to get my truck.(praying the wheel dosent come off)   we used zip ties and duct tape to fix it, and 2 gallons of water.

 

My dad stayed home and I drove back to fix it. Had to ziptie the overflow tank and seal it good with ductape. Poured water into the radiator and made the rest of the 18 miles to town.

 

Out of all of the vehicles we have, the manche is the last man standing. mymom can no longer call it the rolling turd, otherwise it would have left her on the side of the road in the middle of nowhere.

 

It is the last coMANche standing and it gained respect in my family!

 

(Duct tape and zip ties can fix a lot)

Link to comment
Share on other sites

MJ saves the day ;)

Yup... duct tape, zip ties, balin' wire and dry wall screws are always in the emergency kit!!!!!

looks like I need to update my E-kit, what do the dry wall screws come in handy for?
Link to comment
Share on other sites

Jerry... I've gotten.... lazier??... as the years have gone by.  My E-kit is multi-purpose instead of one for the Jeeps, and another for the garage and yet another for the woodworking shop.    Gets used in the Jeeps, garage, (garage one has a plasma cutter and welders in it too) woodworking,etc.  :laughin:

 

  Just finished a work bench for reloading and used nothing but drywall screws to build it.  Yup definitely lazier!!!  :yes:

 

Link to comment
Share on other sites

Gotta admit It I've used sheetrock screws for many a task myself. (automotive included don't think I ever got that battery cable back off again now that I think about it...) guilty as charged.

My name is bob....and I'm a bodger.

Link to comment
Share on other sites

I have a 32x11.5x15 full size spare under the truck...reeling it up yourself take some playing to fit perfectly...I had an issue where it would go up but hit the diff cover causing it mo to go up...I push the tire on the bumper side down so the other side where the diff cover is is over the diff cover then reel up all the way so it can fit perfect under the truck....

Link to comment
Share on other sites

Are you the same Bob Bodger that borrowed a rifle from me back in 1848 at the Alamo when yours jammed? If you are I would like it back, please.

Whoa hold on thar ...As I recall sir, I swapped you my old lop eared mule and a slightly (if questionably) used squaw for that bent and filty old musket.

A swap is fair and square Mr. Jim (though admittedly I got the best of the deal).

Gotta hand it to you for your memory too.

Link to comment
Share on other sites

 

Are you the same Bob Bodger that borrowed a rifle from me back in 1848 at the Alamo when yours jammed? If you are I would like it back, please.

Whoa hold on thar ...As I recall sir, I swapped you my old lop eared mule and a slightly (if questionably) used squaw for that bent and filty old musket.

A swap is fair and square Mr. Jim (though admittedly I got the best of the deal).

Gotta hand it to you for your memory too.

:rotf:

Link to comment
Share on other sites

Jerry... I've gotten.... lazier??... as the years have gone by.  My E-kit is multi-purpose instead of one for the Jeeps, and another for the garage and yet another for the woodworking shop.    Gets used in the Jeeps, garage, (garage one has a plasma cutter and welders in it too) woodworking,etc.  :laughin:

 

  Just finished a work bench for reloading and used nothing but drywall screws to build it.  Yup definitely lazier!!!  :yes:

 

 I wish my reloding bench looked that nice and organized

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...