JENSSEN Posted October 30, 2012 Share Posted October 30, 2012 Has anyone modded a factory bench seat to allow for head rests,... After my recent accident I would really like to have them in case it ever happens again Link to comment Share on other sites More sharing options...
AMCJeepMJ Posted October 30, 2012 Share Posted October 30, 2012 I haven't thought of modding a factory bench, but have thought about a bar which goes across the back that has two headrests: This hypothetical bar would mount to the inside b-pillar, allowing the exterior trim piece to perhaps cover bolts which would hold it in place. Could be straight, could be wavy similar to a Miata rollbar, but with headrests. Consideration would have to be taken for seat belt mounting and interference. Alternately, a squared a-frame that bolts to the rearmost cab floor and the back wall which has headrests could be built. Just throwing some thoughts out. Link to comment Share on other sites More sharing options...
jeepsouth Posted October 30, 2012 Share Posted October 30, 2012 I've wondered this also ,but i think i'll go bucket seats instead. Link to comment Share on other sites More sharing options...
rmbrown16 Posted October 30, 2012 Share Posted October 30, 2012 My bench has head rest and it was factory you may be able to find one in scrap yard with them already (link to pic http://comancheclub.com/topic/35789-ncbench-seat-no-brackets-or-rails-free/) Link to comment Share on other sites More sharing options...
Butchershop Posted October 30, 2012 Share Posted October 30, 2012 Some seat covers include built-in headrests. Didn't do the Googling, but you should be able to find something on the 'Interweb'. (Eastwood in "Trouble with the Curve") Link to comment Share on other sites More sharing options...
neohic Posted October 30, 2012 Share Posted October 30, 2012 If I were to do it, I'd start with stripping the seat down to the frame and do the same with a bucket just to see the difference. Rymanrph had it done on his old '88. http://comancheclub.com/topic/29227-88-olympic-pioneer-the-addiction-continues/ Not sure how it was done... perhaps he'll chime in. Link to comment Share on other sites More sharing options...
Pete M Posted October 31, 2012 Share Posted October 31, 2012 only the first couple years didn't have headrests. anything after that would work for a donor. :thumbsup: Link to comment Share on other sites More sharing options...
Butchershop Posted October 31, 2012 Share Posted October 31, 2012 Anybody ever seen one of these used? A bit pricey. http://www.andysautosport.com/jeep/1984_1992_comanche/interior/seats/truck_seats/prp/ Link to comment Share on other sites More sharing options...
dasbulliwagen Posted October 31, 2012 Share Posted October 31, 2012 If someone were so motivated, you could fab in a pair of the Dodge Dakota rear window headrests form the crew cab models. They mount to the body above and below the window. Might be an option. Link to comment Share on other sites More sharing options...
Butchershop Posted October 31, 2012 Share Posted October 31, 2012 Ebay has head rests for Comanche. I checked my bench and there are no holes for them. But, I'm sure you master fabricators can make them work. :wrench: http://www.ebay.com/itm/Jeep-Cherokee-Comanche-XJ-MJ-Bucket-or-Bench-Seat-Gray-Head-Rest-Set-84-92-/200748877752?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AComanche&hash=item2ebd90c7b8&vxp=mtr Link to comment Share on other sites More sharing options...
Jerry Posted November 2, 2012 Share Posted November 2, 2012 Stuff an old cushion behind the back of the seat, instant head rest, no fabrication required :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now