Jump to content

29 Spline Chrysler 8.25 with MJ perches NC


Rymanrph

Recommended Posts

I have a 29 spline 8.25 from a 2001 Cherokee that I'm looking to sell. It has 3.55 gears and already has perches welded on for a Comanche. I have all the brake components except the drums. Near Dana 44 strength at a much cheaper price. $150 and pick up only. 704-807-2055.

Link to comment
Share on other sites

I seriously thought I would get rid of this pretty quickly. Everyone wants a Dana 44, but they're hard to come by. Sure you can go pull your own 8.25 and then buy perches and do it all yourself, but mine is ready to bolt in.

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 months later...
  • 2 months later...
  • 4 weeks later...

If it was a 4.0 auto to 4.0 AX-15, it would be perfect, but going to a 4.0/AX-15 will make your driveshaft even shorter, so if you're planning on that swap, then great, get the axle, but don't throw it in until you do everything, then you only need to worry about shortening the shaft once.

Link to comment
Share on other sites

  • 1 month later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...