aresfab Posted April 16, 2011 Share Posted April 16, 2011 The measurement I need are the rear bumper mounting on the back of the frame. Underneath and sides. I have a couple now but like I stated would like to get at least a dozen. Thanks you all for your help. Link to comment Share on other sites More sharing options...
beepbeepmyredjeep Posted April 17, 2011 Share Posted April 17, 2011 If it ever stops raining, I'll snap some pics and take some measurements while I give the MJ an oil change. :mad: Link to comment Share on other sites More sharing options...
beepbeepmyredjeep Posted April 21, 2011 Share Posted April 21, 2011 Got to do the oil change, but didn't get to snap the pics because I ran out of daylight (worked late). Try to do it this weekend. Link to comment Share on other sites More sharing options...
kineticMJ Posted June 7, 2011 Share Posted June 7, 2011 looks promising, i've been looking for a good clean looking rear bumper, hope you are able to get it all sorted out. Link to comment Share on other sites More sharing options...
aresfab Posted October 1, 2011 Share Posted October 1, 2011 Hi everyone, I have had a very rough summer but I am still interested in build stuff for MJ owners. I am currently looking for a rear section of a frame to mike out for accurate brackets. If anyone know of someone parting out a MJ let me know. Let me know if there is anything I can do for you guys too. Thanks. James 847.417.9683 aresfab@gmail.com Ares Fabrication Link to comment Share on other sites More sharing options...
comanche12 Posted October 10, 2011 Share Posted October 10, 2011 Hi everyone,I have had a very rough summer but I am still interested in build stuff for MJ owners. I am currently looking for a rear section of a frame to mike out for accurate brackets. If anyone know of someone parting out a MJ let me know. Let me know if there is anything I can do for you guys too. Thanks. James 847.417.9683 aresfab@gmail.com Ares Fabrication I'm been try contact with you through email. my rear bumper is been off since from your request and you never came to check the rear section yet. :wavey: Link to comment Share on other sites More sharing options...
comanche12 Posted October 10, 2011 Share Posted October 10, 2011 Hi everyone,I have had a very rough summer but I am still interested in build stuff for MJ owners. I am currently looking for a rear section of a frame to mike out for accurate brackets. If anyone know of someone parting out a MJ let me know. Let me know if there is anything I can do for you guys too. Thanks. James 847.417.9683 aresfab@gmail.com Ares Fabrication I'm been try contact with you through email. my rear bumper is been off since from your request and you never came to check the rear section yet. :wavey: edit: you gotta to come by asap before I'm selling the rear bumper. Link to comment Share on other sites More sharing options...
aresfab Posted February 19, 2012 Share Posted February 19, 2012 HI guys. So here it is. We are making them out of thick 6x2x3/16 tubing. Not that 1/8 thin stuff some builders are pushing. It uses 1/4 frame mounting brackets. It come with a 2" receiver. This is not just a piece of 2 1/2X 2 1/2 but 3/16 wall tubing. This is a special tube that is made for hitches. It has a custom wall thickness. This way you will not have a ton of slop in the receiver. You can get them with D-ring mounts. And I am introducing a new option with this bumper. Recessed lights. Let me know if you guys think of any other options I should make for this. It mounted in about 15 minutes. And hardware is included. I want to thank all the MJ owners that help me build this. You guys are great. Thank you. Link to comment Share on other sites More sharing options...
cody4359 Posted February 19, 2012 Share Posted February 19, 2012 :redX: Link to comment Share on other sites More sharing options...
dave92cherokee Posted February 20, 2012 Share Posted February 20, 2012 Linked from their facebook page: Link to comment Share on other sites More sharing options...
comanche12 Posted February 20, 2012 Share Posted February 20, 2012 Looks good on my mj :thumbsup: :cheers: Link to comment Share on other sites More sharing options...
cody4359 Posted February 20, 2012 Share Posted February 20, 2012 i was hoping to see something along the lines of the bumper on the green jeep in this thread. viewtopic.php?f=2&t=34047 i like the recessed lights option but IMO bumpers just look cheap/funny that don't wrap around and protect the lower quarters of the bed. just an idea Link to comment Share on other sites More sharing options...
AMCJeepMJ Posted February 21, 2012 Share Posted February 21, 2012 Wow it took a really long time to come up with a really basic bumper. What is this thread- 11 months old? Link to comment Share on other sites More sharing options...
mnkyboy Posted February 21, 2012 Share Posted February 21, 2012 Looks like the average homebuilt bumper. Link to comment Share on other sites More sharing options...
ejndssn Posted February 21, 2012 Share Posted February 21, 2012 The work that the devil dog did on his bumper looks great :brows: . I am partial to the step variants of bumpers with a potential wheel carrier attachment that swings away which I have not seen any made :idea: other than some of the mods on this site and what other companies are selling. http://www.comancheclub.com/forums/viewtopic.php?f=7&t=33558he has done a great job on this bumper and kinda interested in something like it with a wheel carrier. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now