aresfab

HI guys. So here it is. We are making them out of thick 6x2x3/16 tubing. Not that 1/8 thin stuff some builders are pushing. It uses 1/4 frame mounting brackets. It come with a 2" receiver. This is not just a piece of 2 1/2X 2 1/2 but 3/16 wall tubing. This is a special tube that is made for hitches. It has a custom wall thickness. This way you will not have a ton of slop in the receiver. You can get them with D-ring mounts. And I am introducing a new option with this bumper. Recessed lights. Let me know if you guys think of any other options I should make for this. It mounted in about 15 minutes. And hardware is included. I want to thank all the MJ owners that help me build this. You guys are great. Thank you.

Hi everyone, I have had a very rough summer but I am still interested in build stuff for MJ owners. I am currently looking for a rear section of a frame to mike out for accurate brackets. If anyone know of someone parting out a MJ let me know. Let me know if there is anything I can do for you guys too. Thanks. James 847.417.9683 aresfab@gmail.com Ares Fabrication

The measurement I need are the rear bumper mounting on the back of the frame. Underneath and sides. I have a couple now but like I stated would like to get at least a dozen. Thanks you all for your help.

Don't count me out yet. Rob is right. I am very busy. I am working on the rear bumper and side rails. I could have made a rear bumper and side rails faster but I am also making fixtures to fit all MJ's not just one MJ. You would be surprised how far off Jeep frame jigs can get. Some time ago I was making a jig for a YJ rear and after measuring over a dozen YJ's found measurements as far as 7/8" off from the average. I have been working with a few members trying to get as many dimensions as I can. FYI I need more. I need to find the average. What if I were to make a jig off one MJ and that one is way off, for what ever reason. Who would that help? One person. I am tring to make these for all Comanches. ANd I have to say that so far everyone has been so helpful. The members here are top notch. I am selling MJ front bumpers on ebay. Yes this is just my XJ bumpers relabeled as a MJ bumper. I am working hard to produce products for the market. This is something that I do not trust to anyone else but myself. I humbly ask for your patients. Please feel free to call PM or email me anytime. I alway make time to talk to people. Thanks James 847.417.9683 Ares Fabrication

Hey guys. Need some help. I need pictures. Can you send my the best hi-res pictures you can get of the rear section of the frame were the bumper mounts. Stock and especially after market bumpers. It would be nice to see what the other guys did. Thanks. You can email them to my email aresfab@gmail.com.

Does anyone know what the dimensions of the material they used for there hitches. 2"X2"X?

Explain to me what you mean about this "correct size" with the receiver.

Hello Jeepers This is James with Ares Fabrication. I am very pleased to see the response to my interest in building MJ parts. My fab shop is located in Schaumburg, IL. Near Wise and Roselle Road. If anyone is near by that would like to help, let me know. Looking forward to working with you all. You can call or email me anytime. Let me know what's up. Also what parts do you guys want. Thanks, James 847.417.9683 aresfab@gmail.com Ares Fabrication